ooohhhh noooo
right i reset my preload to standard(half a hole) removed the jet completly, stuck a bleed valve between the amal and wastegate and even with this completly unscrewed ie bleeding it all, i still only make 20psi??????(tried 2 boost gauges as well)

could this be a problem with the wastegate itself as it just will not make good pressure unless i wind up the preload loads on the actuator!!!!
and then it only makes it at plus 6500rpm

I would of thought i could get at least 26 psi witha t35 as i could make 24psi with a t3?????

All i can think of is that the wastegate is fooked on this turbo's exst hsg

HELP!!!!!

Pugo