Originally Posted by RSDOHC
this is my first topic here in Passionford.com
Welcome to PF
Originally Posted by RSDOHC
Is it possible to drive whithout the amal valve
Yes, if you have a bleed valve, otherwise, I don't think you'll have any sort of boost control and that would not be a good idea.
Originally Posted by RSDOHC
and how much boost can the engine run with the T34 and standart MAP (without the amal valve).
Whether you have an amal valve or not won't make a difference.
Not sure how much boost you can reliably run with a T34, a T3 would be maximum 1bar (15psi) with standard injectors, so I would have thought a T34 would have to run less boost than that, otherwise you will run lean.
Originally Posted by RSDOHC
How much fuel pressure should be set.
Don't know.
Are there any specialists round your area who could make sure the car is setup properly ?
Also, might be a good idea to check the fuel pump and filters aren't too old.