Im looking at building up a long studded 200 block which comes with standard pistons and trying to decide what to do!!!

For starters it'll prob just be a stage 3 jobby standard cams greens etc but...... as its being built from scratch i wanna leave scope for later mods which on advice will prob end up being greys and a bd14 inlet together with an MSD closed loop and dizzyless conversion!!!

So now trying to decide whether i get the standard pistons that come with it pocketed and run standard comp as i know alot of it is down 2 mapping and you can still get good power with standard comp, or whether to get a set of low comp pocketed pistons and use those as i know alot of ppl use low comp.......


Any help/advice is apreciated