View Single Post
Old Apr 10, 2006 | 11:10 AM
  #1  
silky16v's Avatar
silky16v
Get on That!
20 Year Member
iTrader: (1)
 
Joined: Jan 2005
Posts: 2,701
Likes: 0
From: Lake District
Default Cosworth 200 Bottom-End (wire-rung)

RS Cosworth 200 Block (Wire-Rung) fully rebuilt 1850 mile ago

I have reciepts for all work done and for all parts

work included re-bore of block to 0.5mm over-size
All main bearing tunnels were checked and measured & face of block aswell

300 mile old Standard Crank & Rods used when rebuilt (standard grind)
the crank was polished and balanced

Brand new 0.5mm Standard Mahle Pistons

WRC High Pressure Spec Oil Pump & WRC Spec Water Pump from (msport)

Brand New Ford Bearing Fitted Mains & Big-Ends

ARP Big-End Bolts

Machined Flat 4x4 Flywheel & New Bolts Fitted

Also comes with PAS Pump & Alternator & 4x4 Sump fitted & 4x4 Distributor

Engine was removed from my 4x4 1993 Saph due 2 it being written off (not my fault ) And had only just been Stage 3 setup from STU@MSD (360bhp)

Engine is in perfect condition & is ready to be fitted & can be viewed at anytime

Collection Prefered

£1400 O.N.O

Please Pm or Call me on: 07743448179






Reply