Old 09-04-2006, 03:38 PM
  #1  
boost mad
PassionFord Post Whore!!
iTrader: (8)
 
boost mad's Avatar
 
Join Date: Sep 2004
Location: sussex
Posts: 6,289
Likes: 0
Received 3 Likes on 3 Posts
Default Breaking saph cossie updated 03/05 with pictures + more bits

EVERYTHING LEFT IS GOING ON EBAY SLOWLY
http://search.ebay.co.uk/_W0QQsassZc...QfsooZ1QQrdZ0?
mercury grey

2 x Inlet elbows

4x4 Intercooler ,2wd Intercooler




water pump


Distributor, rotor arm, cap


oil pump and distributor drive


oil seal and cover for the above


dipstick
]


2X 2wd exhaust manifolds ( one has a dodgy thread where the secondary bit bolts on )

2 X power steering pumps



front oil seal carrier with new oil seal



2 sets of cossie dials ( one has white dials )



90 amp cossie Alternator



Spec R dump valve ( i think )





2 fuel pressure regulators



kidney box



the metal water pipe that goes over exhaust manifold

Distributor

Standard Oil cooler

Oil pressure switch

cloth interior

909 leads ( covered about 4000miles )

2 thermostat housings ( 2bolt type with recent themostats )



diff....................................prov sold


wheels ..............................sold
headlining..........................sold (Moonstone Steve)
4Pot front calipers...............sold ( 403ayb)
Rear Calipers......................sold ( markyd3 )
heatshield...........................sold (dave cos4x4)
Gearbox.............................sold
Shiny heat shield.................sold (charliesaff)
Coolant hoses....................sold ( spadge )
Both cam covers................sold ( spadge )
Coil..................................sold ( spadge )
Swirl pot.......................... sold ( spadge )
cams with pulleys...............sold ( cosbag )
Airfilter.............................sold ( Jano Oddkid )
4x4 bonnet........................sold ( cunver )