the exhaust valves must of only been very very slightly bent.
not quite seating properly or something

as i didnt notice it with the head off. and the car didnt mis-fire or anything
like that..
odd. but i guess it will all be good as new when its done!!

things done aareeee
(top down lol)

cam bearings
stem seals
valve guides
2 new valves
Grp A H/Gasket
4 new 0.5mm mhale pistons
new little ends
new water pump
cam belt and tensioner
engine mounts
bottom end bearings
crank polish (in perfect condition )
new cosworth oil pump
oil pump drive
AP clutch
every gasket and seal in the engine replaced

block refaced (3 thou)
head refaced (3 thou)
Flywheel re-faced

everything (engine block, spray bar etc)
chemically cleaned/de-greased


everything else shot blasted to clean it
Diff casing
sump
engine mounting arms

new oil pressure gauge
new oil temp gauge



And its only been off the road a month itching to get it back and
run it in!!