Originally Posted by escortrsmatt
will i not need to set up the fueling and boost using a rolling road if i buy this from you stu?
I strongly reccomend you have the fuelling checked using a wideband fuel monitor on either rollers or better still the open road.
The fact my chip has asked your fuel injectors to open at 4000rpm and spray fuel at the inlet valve for 18ms at 5.3bar fuel pressure (1.8bar boost) does not necessarily mean your fuel pump supplied the fuel, the fuel reg regulated the pressure to 5.3bar or the wiring loom even asked the injector to open for long enough in teh first place.
If you follow what im saying?
Fully fitted and setup price for teh same kit is £565 but i realise your a long way from Blackpool for this relatively simple Job. Quite a few of my mail order customers from your area use Mark Shead for teh fitting and are always 100% happy.