hello ppl, i am having the same problem now but i will post my own post in a min.. cos i am not gettin a spark on 1/2 plug.

anyway this is the best way to see if your crank sensor is working disconnect it from the engine plus unplug it from the loom, then once in your hand plug the loom back into the sensor and then just hold it to the engine or anything which will ground it to the car.

by the way make sure you have the ignition on, if its working you will hear the fuel pump purge and relays click, plus if you need to check the phase sensor is working then just leave the igniton on un plug it, then plug it back on you should hear the same as above.

now ppl please take time out on my post i have come to a point where i am bangin my head now.....