correct - text file CONNECT gives pin information

copied and pasted from there, but could turn out a bit wonky due to bb code

S.E.C.S S8 ECU CONNECTIONS (COSWORTH WEBER VERSION)
================================================== =


PIN ORIGINAL ECU S8 (IF DIFFERENT)
-------------------------------------------------------------------------

1 POWER GROUND

2 LAMBDA SENSOR INPUT

3 CRANK SENSOR GROUND

4 CRANK SENSOR INPUT

5 PHASE SENSOR GROUND

6 KNOCK SENSOR GROUND USER OUTPUT 2

7 PURGE VALVE USER OUTPUT 1 - WATER INJECTION

8 DIAGNOSTIC SOCKET INJECTOR 5

9 VREF MONITOR USER INPUT 1

10 POWER RELAY

11 VREF NEGATIVE

12 GENERAL OUTPUT WARNING LAMP OUTPUT

13 OCTANE ADJUST INJECTOR 6

14 OCTANE ADJUST INJECTOR 7

15 MAP SENSOR INPUT

16 BOOST VALVE

17 THROTTLE POSITION

18 INJECTOR 4

19 POWER GROUND

20 POSITIVE SUPPLY

21 - TACHO DRIVE OUTPUT

22 KNOCK SENSOR INPUT USER INPUT 2

23 PHASE SENSOR INPUT

24 IGNITION TRIGGER GROUND

25 IGNITION TRIGGER OUTPUT IGNITION 1 TRIGGER OUTPUT

26 - IGNITION 2 TRIGGER OUTPUT

27 DIAGNOSTIC SOCKET INJECTOR 8

28 FUEL PUMP RELAY

29 COOLANT SENSOR

30 VREF POSITIVE

31 CHARGE AIR SENSOR

32 INJECTOR 2

33 INJECTOR 3

34 IDLE SPEED VALVE

35 INJECTOR 1