View Single Post
Old Mar 16, 2006 | 10:19 PM
  #5  
SWITCHBLADE's Avatar
SWITCHBLADE
Passionate about fords
iTrader: (5)
 
Joined: Jul 2005
Posts: 1,457
Likes: 0
From: Hampshire, off the a303.
Default

hi matt, ive got one on my series 2 rs, ive also got the pro alloy rad. my one is the newer type where the twin fans go between the rad and intercooler which looks alot better. performnace wise its definatley dropped my act's down from when i had a charge cooler, also my rad is the nuts, even with the intercooler now blocking my rad my temps sit below quarter when moving and i dont even see the needle hit anywhere near half way in heavy traffic. with regards to fitting, its pretty straight forward, best is to take ya time though to get it all correct and looking good, a couple of hours youll be done, my 90 spec bumper didnt quite go straight back on, i had to pack it out a little with some washers but that is only while my new bumper is being modded.........in standard form the bumper does block a hell of a lot of the intercooler to be honest so im hoping to get even lower temps when the new one is fitted. pro alloy are beautiful bits of kit, im well happy with mine. one of the best choices i made was buying their products. roll on the summer to see if it performs just as good !!!!.

dave
Reply