Not one of Colins Beefy, no.
But I have used Felpro's 'Head saver' which is a 20 or 40 thou copper
shim with a single gasket with no ill effects.
Another route to consider maybe would be to get one of Ferriday engineerings copper head gaskets so that you can specify the thickness
(depending what C/R you want to run). That way you won't have to worry
about multiple seals cos it's a gasket/just like ALL the one's in the 'olden days' used to be. It won't be cheap (80/100 quid) but just remember
you can reuse it many many times/try doing that with a Felpro or Payen.
Good luck.