Originally Posted by Cossie-Iain
Mark the chip says 3BP8FR 803 AB installed 27/4/00.
The loom plugs on the passenger wings are still there if thats what you mean.The -34 was set by kenny at MSD.I hope its something simple.
1st thing to do is remove loom plugs as there will be corrosion cut wire back until no corrosion left, I did one car that it was all the way back to the Ecu from the plugs on 3 wires,
The boost controler is set to run with a -31 it will work best with this,
The -31 opens ealier than a -34 but is more progressive so correctly fitted with the right boost program written in to the chip the -31 is the best one to use.
Mark