I was removing the exhaust from my XR4x4 so I could fit the stainless ones I have, when I started to remove the downpipes I noticed the nearside was only held on with one bolt and that it was not even the correct bolt or tight!
the stud in the manifold had snapped so I though ok remove the manifold and sort it no bother..On removing the manifold I found one stud ( the back cylinder) had been snapped off flush with the head previously

so I now need to drop the engine and box down to be able to drill it out, any other way I could do it or am I choosing the best option?

steve[/b]