Originally Posted by JonnyBravo
I cant remember off the top of my head which wire does what.
I wired in the tech plug though and just bridged the correct pins out to flash the codes
I know for sure that a cavalier and calibra both had tank vent valves, judging on what you said by PM yours has got one, It should be attached to the 2 studs of the inlet manifold (master cylinder side)
Got any brake cleaner, if so have a good spray about !
James
mine does have waht u described. it is secured using the last 2 inlet manifold bolts. i'll take a pic when im round there and post it up. ive got some wd40 so i'll have a spray with that.
ive got some info off mig that i found but its a bit vague.
hopefully i'll be back in a few hours with some more info for u to process.
