View Single Post
Old Feb 9, 2006 | 08:58 PM
  #2  
mk2tim's Avatar
mk2tim
Part of the Furniture
 
Joined: Feb 2005
Posts: 175
Likes: 0
From: oxfordshire
Default

pcd of mk2 escort is 4x108, some new fords have 5 stud and sum are 4 stud but dont know there pcd possible the same as u can get cossy rims on a mk2,
To work out the offset the wheel must be measured accurately using the following steps
Measure the overall width of the wheel - OW *
Measure the ‘T’ dimension, which is the measurement from the back of the bolt up face to the outside of the inner rim
Divide the overall width by two which gives you the centre line.
Minus the ‘T’ dimension from the centre line.
ET=T-OW/2


cant say ive seen them on any mk2 ive seen would need some big arches 2fit then in
Reply