Originally Posted by foreigneRS
just measured up a new head gasket for you roughly with the wifes sewing measuring tape.
gasket length 457mm, width 146mm
bore centres 103mm, gap between bores 9mm
from front edge of gasket to front edge of no1 bore 22mm
from back edge of gasket to back edge of no4 bore 36mm
that should give you enough information to say yay or nay
just thought, maybe mm is difficult for you? 25.4mm = 1 inch
Thanks for the measurements, thankfully most of the measuring devices with US standards usually have Metric on the other side, so mm is fine.
Converting from Cubic inch to CC or the other way around is the real fun one.