Originally Posted by RS3DR
Originally Posted by andy wilkins
Hello again,
One reply said the square peg is 16 degrees btdc and the picture shows the v as 16 degrees btdc....
Which one is correct guys??
cheers
andy
i believe the lug to the left of the vee groove is to set the 'cam' timing to 16% btdc, in the pic it shows the 'ignition' timing as being the vee groove, u can check this once engine is running with a timing light and adjust accordingly,
good luck
Ricky
the v groove is 16 degrees btdc...forget about the groove and as in first pic above ,set it to the left hand edge(looking from front)of the lug for tdc of no 1
mark