Originally Posted by big russ
I was thinking of using 18mm marine ply so i can put up some shelves and cabinets etc.Was just going to panel around the area where my bench and toolbox is.
Its a compton garage thats made out of those bolt together panels,strong as fook
hi pal they are re-enforced with steel wires, you just have to drill round them, DO NOT USE A HIGH IMPACT DRILL, if you use a rotary hammer or a impact type like a hilti you will have a load of broken concrete panels mate, ive drilled mine , its not easy trust me , but they are usually only reenforced in the thick part of the panel and the wires are vertical, you can drill round them
