ok heres how to fit your fuelcom, THE VERY FIRST THING is, if you can find a scrap car that had a fuelcom, and get the multiplug and a couple of feet of the loom connected too it, whilst u hunting one down there should be a yellow plug behind your speedo/dash this is the lights on/power plug to the fuel com. Since ur car is an EFI you can wire the FUEL PULSE and SPEED SENDER wires straight ooff the ECU block using scotchlocks. The fuel tank sender is wired into a black plug that should be under the rear seat cushion. all these wires you need to run to the MULTIPLUG if you have one. ie 3 wires.... one speed sensor...one fuel pulse/usage....one fuel level. see if you can get a plug and bit of loom first then i can tell you wich wires to connect etc etc