Afternoon pepole.

Right, i got all the wiring etc finished for the new ECU but when i start the engine up it won't then turn off.

Some thing is keeping the ignition black wire live.

The ignition switch is fine (i've tested and replaced it).

It only stays live when the engine is running (if i simply turn the ignition on then off the wire will go dead as it should).

I've checked everything, I followed all the wires everywhere to try and find out what is keeping the ignition wire live and can't find anything.


Does anyone know if this could happen due to the Heated front screen??
I had a relay in the under dash carrier but then realised the loom had one under the bonnet as well !!!
Reason i ask this is because the blue wire from the alternator goes to this relay!!

Also my rear wiper motor and boot light are not working.

any help would be much appreciated.

Matt.