Originally Posted by Moondust_crust
Originally Posted by safechav
I'm familair with the MK3 wiring
familair? he is like the king of car electrics mate, if he cant sort ya nobody can!
Speechless......really don't know what to say to that
Thanks is a start i guess!!
Have you been reading all my posts or something?
Originally Posted by street
Originally Posted by safechav
Which warning lights? For the auxiliary warning module?
I'm familair with the MK3 wiring
Yep, its the indicators, handbrake light, oil light, water light..... think thats all of them?
Cheers!
The auxiliary warning module has 5 lights, Brake pad wear, washer bottle level, oil level, coolant level and that godly petrol light.
Duno what wires u need to know so fuck it i'll list them all
(numbered as they appear on the auxiliary warning module plug
1 - Grey/Black (joins into the common illumination feed)
2 - NC
3 - NC
4 - NC
5 - Brown/Yellow (RH Brake Pad Sender)
6 - Brown/Yellow (LH Brake Pad Sender)
7 - Brown/Green (Fuel Sender)
8 - Brown/White (Washer Fluid Sender)
9 - Brown/Red (Coolant Sender)
10 - Brown (Electronic Dipstick)
11 - Brown/Black (Electronic Dipstick)
12 - Brown/Black (Low Oil Warning Lamp In Instrument Cluster)
13 - Brown/Red (Low Coolant Warning Lamp In Instrument Cluster)
14 - Brown/White (Low Washer Fluid Warning Lamp In Instrument Cluster)
15 - Brown/Green (Low Fuel Warning Lamp In Instrument Cluster)
16 - Brown Yellow (Low Brake Pad Warning Lamp In Instrument Cluster)
17 - Black/Red (Positive Feed To Warning Lamps) (12,13,14,15,16 are all switched Negative Outputs)
18 - Black/Yellow (Switched Igniton Feed)
19 - NC
20 - (Permenant 12v) NOTE: i have seen modules that dont use a permenant 12v however?????????
21 - NC
22 - Common Negative/Earth
NOTE: all the sensors with the exception of the Electronic Dipstick only have 1 wire to the module, and the other side of the sensors all connect to Common Negative/Earth