Tombra, thankyou, but im unsure what the website means and what pins i bridge to get my fuel pump running.

am i using pins 30 and 87 or 15 and 87

"When fault finding or fuel pressure testing it will be necessary to have the pump running when the engine is stationary, this can be achieved by bridging terminals 30 and 87 with a small length of wire. For safety reasons it is good practice to insert a ten amp fuse into the bridging wire"


"CAUTION :- do not be tempted to by-pass the relay by bridging between terminal 15 (switched live) and 87 (fuel pump) as this will start the car, but is potentially dangerous."

It's a series 1, with what im told is S2 fuel pump wiring, so i assume i need the purple fuel relay instead o the S1's green relay?