..i am gonna say this as it is a good advert for always use a pro if you are a bit silly EVERYTHING on my car is DIY as i enjoy it but i aint no mechanic!!!!

Picture the scene thursday night...and i have the leads with cap on resting on the cross member and only the front part of inlet on,no injectors,rail still there and connected....all off as i had to get to the oil pressure sender.....so i decide after fitting new oil set up to see which wire was the oil light....so i went into car and turned ignition on...now your thinkin fooking hell coil live and fuel gonna pump thru ......NO because i have a switch to seperately put pump on...BUT i heard a noise which i thought was the pump ..so flicked the switch with ignition ON i then heard one of the scarest noises....petrol igniting...turns out the noise was the ABS pump DOH ...so i look up and BIG fire ignition off into the kitchen shouting FIRE!!!!!!.....Lots of water and out it went after about 30 seconds...Jesus was that scary.......i honestly thought my name must be Jim

I am gonna die doin DIY ROFL

Givus a job i can do that