Originally Posted by Stu @ M Developments
The map looks fine, other than a lack of progression in the lower speed advance maps. All that will cost you is low down torque.
The figures still look higher than i expected you would get away with though, but if they work they work, like you say, the overlap may mean your not filling the cylinders as well as the specs suggest.
Job welldone if its all working
Right at the top of the rpm 6300+ it just seemed to want more advance. I had lower figures but it just seemed to stop it revving.
There was no det up there and it revved out a lot better with some more advance.
Cheers Stu. Thanks for all your advice. The plug rating was a good catch that could of turned nasty
I'm still on the really steep bit of that learning curve
