Originally Posted by Doug Stirling
Boost is capped to 24 - 28 PSI up to 6,500 RPM...This is to prevent the surge that only MAD engines dont suffer........Maybe Mark will tell us some of his secret specs one day
.....
Good Power Doug
It is sad when you are limited on boost because the engine Spec aint optimum. I see it shows in the Torque which should be over 500FT-LB if all was well.
I think myself & Ade must get on a RR & then all will be revealed.
This is not a knock cos the Power is good but im also sure Mark aint going to tell, mind you i know where a certain guys Specs fall down & all i will say is Lateral thinking.
Rod