Originally Posted by PF NICK
Originally Posted by fudgeass
any other ideas
Smack it with a big fucking hammer.
Be careful you don't miss and hit the shocker, wheels studs etc, and batter the shit out of it.
Before you put the new discs on, clean the hub up with some emery cloth and use a very thin coating of copper grease on the mounting surface.
i bought some copper grease today aswell, im not gonna let it happen again...
and im making sure i hit the bottom of the disc to avoid everything else
i was gonna take to the hub with the old angle grinder with wire brush on it to clean it up...