Guy's Guy's
So far only 'addition' has got it right/you have to remove the modulators AND the 4 (count them) Balloon type pipes that run from them otherwise you will always have 1980's style shite brakes. While you're at it forget about spending thousands on silly brakes.
1, Fit 2 wd cossie discs on the front with brackets (£40 from Clint Gaskin) and your standard S2 calipers.
2, Fit 253 mm Scorpio discs on rear with Scorpio calipers and again £40 brackets
(this time from Richard Pastie)a MK6 RS 2000 handbrake cable/not forgetting to be
V/careful with rear apportioning valves otherwise it'll swap ends/not good
in Lea Bridge Road on a Saturday afternoon Ahem!
3,Did I mention removing ALL the flexible hoses and replacing them with steel braided and copper pipes.
4, If in doubt replace the rubber sealing bung on the servo.
5, Enjoy 21st century type braking just like me for a total of about £350.
Hope this helps kiddies or perhaps you really want to give Mr Burtons et al
ALL YOUR MONEY.
Luv n Huggs the DR