Old Sep 22, 2005 | 05:31 PM
  #1  
big_wig_074's Avatar
big_wig_074
PassionFord Post Whore!!
 
Joined: May 2003
Posts: 6,594
Likes: 3
Default s2 bits for sale COME AND GET IT FOR FREE!

due to a MASSIVE change in direction from me im now breaking my track day project,so here goes!all MUST sell!
MFI stg 2 head,needs cam,followers and cam cover to complete,in good condition,valves etc fitted £100


piper 285t2 cam in good condition with a set of piper valve springs £80

kent cams vernier pulley in light anodised blue,looks very nice £30 prov sold


very good condition s1 steering wheel,no tears £20 PROV SOLD


goodridge front brake line braided kit,unused,in box £35 SOLD


powergrip cambelt,unused £5


escort cosworth t28 turbo,very good condition,with uprated actuator £80 SOLD


2x 1.8 zvh bottom ends,both are split, block crank etc all separate,one is originally a fiesta frenzy bottom end,did have accralite pistons(2 need replacing for definite) all the machining work etc has been carried out,includes 1.8 sump and adjusted engine mount,the other requires a sump and engine mount and has machined std pistons to run lower comp ratio,however the block has also received all necessary modifcations to run a cvh head. both need cleaning and rebuilding,but the expansive stuff has been done on both. £150 for the sumped one and £100 for the other



EFI head,needs a damn good clean,got it from philM who says it was kept close to some straw or something,so is very dirty,but would be ok with a clean up!! £20

a set of used koni adjustables, look used as they are,but work fine £75 prov sold

uprated gearbox with diesel ratios and an uprated bearing for higher power £150

group a coil,very good condition,covered approx 5000 miles on my old cossie,and fits nicely in the escort engine bay £25


bayjoo 17psi s2 fuel ecu £150

used 4 paddle clutch (these can be rebuilt) still has a bit of life in it but not much £40

rst exh manifold good condition £15

rst t3 with manifold needs new water connections,good condition,didnt smoke and play is minimal( i DO mean REALLY minimal,no problems) £60 prov sold

EFI inlet manifold with throttle body and tps £20

more bits soon!
if theres anything that may be on a xr3i with a rst engine that you want let me know as its ALL goin and all that is just bits i have lying around!
none of the above include postage,im open to offers for bulk buying etc...but dont go stupid,they all seem fair prices.
cheers.
Reply