Here's a little tip for anyone trying to re-fit track control arms, especially on an S2....

Get a strong ratchet strap, the sort used to tie a car onto a trailer, available from trailer centres etc. Fix it around the antiroll bar from side to side, either in 1 big loop or using the hooks at each end. Ratchet up the strap to pull the antiroll bar in until the TCA ends easily fit into the inner chassis pickup points. The tension on the strap will be very high but it's quite safe as long as you use a good quality strap and ratchet handle. Tighten up all the nuts, especially the ones on the end of the ARB, then release the strap. (No need to remove the front mounting bushes on the ARB.)

Easy!

Martin