how much bhp from this spec?
#1
how much bhp from this spec?
rite iv finally got my j reg saph verry close to my expectations now after converting it to 2wd with around 400 bhp
but my curious question is how much bhp do i have roughly? i baught a chip from msd to suit my spec so its not been on a dyno
my spec it
l8 pectel bored msd chip siemens 83lbs
92mm bore woosner pistons
ported an pollished head and manifolds
inlet elbo mod with 10mm spacer plate
garret t38.63 turbo with 2wd ex manifold
500 intercooler an 3inch exzorst
8k rpm rev limmeter
bd14 inlet cam std exhaust cam
2bar boost
is this above 400 bhp ??? feels close to me lol
but my curious question is how much bhp do i have roughly? i baught a chip from msd to suit my spec so its not been on a dyno
my spec it
l8 pectel bored msd chip siemens 83lbs
92mm bore woosner pistons
ported an pollished head and manifolds
inlet elbo mod with 10mm spacer plate
garret t38.63 turbo with 2wd ex manifold
500 intercooler an 3inch exzorst
8k rpm rev limmeter
bd14 inlet cam std exhaust cam
2bar boost
is this above 400 bhp ??? feels close to me lol
#2
Too many posts.. I need a life!!
iTrader: (4)
Join Date: Apr 2006
Location: isle of wight
Posts: 808
Likes: 0
Received 0 Likes
on
0 Posts
The way I see it is estimations really are just that. From that spec you could say 400bhp, you could say 450bhp. until you get it on the rollers mate you won't know. There are plenty of things that can influence your final power level so guessing from a spec list is merley just a waist of time.
What I can say for sure though is you will have one fast cosworth
Thread
Thread Starter
Forum
Replies
Last Post