Fiesta RS Turbo Project
10-09-2014, 07:01 PM
#1203
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: Aug 2004
Posts: 1,041
Likes: 0
Received 0 Likes
on
0 Posts
well heres a little up date order my Gaz coilovesr there should be here in a few weeks
took my front and rear disc to the zinc pas place to get coated pick uo some powder coated bits !!
spare wheel tray looking alot better lol !
[URL=http://s1293.photobucket.com/user/1900cvh1/media/newcarphotos002_zpse57ada0f.jpg.html]
[/URL
fitted
Also got my rear caliper brks !!
Rear caliper with a fresh coat of powder coat !
just got to fit the piston seals now !
Also got a new alternator guard !
also got to send my crossover pipe and manifold to be shot blasted !!
Also my cossie alloys have gone to be refurbished and ive just order my tyres so hopefully
the next post you will see the car on its new coilovers new alloys and all the calipers fitted and new brake lines, all the coilovers set up!!!!
took my front and rear disc to the zinc pas place to get coated pick uo some powder coated bits !!
spare wheel tray looking alot better lol !
[URL=http://s1293.photobucket.com/user/1900cvh1/media/newcarphotos002_zpse57ada0f.jpg.html]
[/URL
fitted
Also got my rear caliper brks !!
Rear caliper with a fresh coat of powder coat !
just got to fit the piston seals now !
Also got a new alternator guard !
also got to send my crossover pipe and manifold to be shot blasted !!
Also my cossie alloys have gone to be refurbished and ive just order my tyres so hopefully
the next post you will see the car on its new coilovers new alloys and all the calipers fitted and new brake lines, all the coilovers set up!!!!
09-10-2014, 05:41 PM
#1204
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: Aug 2004
Posts: 1,041
Likes: 0
Received 0 Likes
on
0 Posts
Well a small up date !!!
Before !!!!
After !!!
Got the jack powdered coated !!
Also got the drive shafts back and cv joints !!
Also i got a really good whole car loom and made it better !!!
Braided it all up in the engine bay !Pectel style !!
Started striping out the car to start fitting the loom !!!
Before !!!!
After !!!
Got the jack powdered coated !!
Also got the drive shafts back and cv joints !!
Also i got a really good whole car loom and made it better !!!
Braided it all up in the engine bay !Pectel style !!
Started striping out the car to start fitting the loom !!!
07-12-2014, 09:30 PM
#1212
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: Aug 2004
Posts: 1,041
Likes: 0
Received 0 Likes
on
0 Posts
A little update for now !!
A late spec steering cowling
Rear caliper brkts all gold pas !!
Front caliper brkts
Also got a new end for my powder coated jack
Also got some more braid and clear shink tube for the labeling
A late spec steering cowling
Rear caliper brkts all gold pas !!
Front caliper brkts
Also got a new end for my powder coated jack
Also got some more braid and clear shink tube for the labeling
19-02-2015, 03:48 PM
#1217
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: Aug 2004
Posts: 1,041
Likes: 0
Received 0 Likes
on
0 Posts
A Big up date !!!
Stripped my rear calipers down to get zinc coated !!
all built back up !!
all fitted with new braided brake lines make and fitted !!!
Got the front calipers zinced aswell !!
Looking good with the brakes all fitted !!
A few or the late spec interior all fitted and the drivers seat all repaired !!
Stripped my rear calipers down to get zinc coated !!
all built back up !!
all fitted with new braided brake lines make and fitted !!!
Got the front calipers zinced aswell !!
Looking good with the brakes all fitted !!
A few or the late spec interior all fitted and the drivers seat all repaired !!
Thread
Thread Starter
Forum
Replies
Last Post
paceo
Restorations, Rebuilds & Projects.
5
03-02-2016 10:31 AM
Ben26
Pictures, video & Photoshop Forum
10
27-08-2015 08:56 PM
paceo
General Car Related Discussion.
1
27-08-2015 12:45 PM
