Michelin/pilot escort cosworth (UPDATE)
#81
Wahay!! I've lost my Virginity!!
Thread Starter
lots of the parts you will need can be baught of mt motorsport as he brakes lots of escort cosworth
i would put a mag grpa peddal box into it, mt has one for sale or did have on his website.
will you fit the rear of the shell for suspenion pick up points ect for mounting the mag rear end ??
hers a few photos hope i can be of help, i love escort cosworth rally cars
carbon center dash section
front grpa x member, wide track tcas,com struts ,gravel up rights ,proflex suspenion
square beam, wide track , black mag arms ,bladed anti roll bar, proflex grpa suspenion
thanks steven
i would put a mag grpa peddal box into it, mt has one for sale or did have on his website.
will you fit the rear of the shell for suspenion pick up points ect for mounting the mag rear end ??
hers a few photos hope i can be of help, i love escort cosworth rally cars
carbon center dash section
front grpa x member, wide track tcas,com struts ,gravel up rights ,proflex suspenion
square beam, wide track , black mag arms ,bladed anti roll bar, proflex grpa suspenion
thanks steven
And Yeah I probably will be, that's one of the next things I have to decide on, just haven't had much time, which sucks But ive just got MT to price up the mag Rear end they have in at the moment so hopefully he'll get back to me pretty soon
Yours is looking very nice, you using it for track/rally or just fun?
Ben
#83
Wahay!! I've lost my Virginity!!
Thread Starter
Is there anyone in the Whitby/scarborough/ York area that is very good and neat at Mig welding, as I need abit doing to the cosworth ASAP. The person who as suppose to be doing it, has gone abroad working and was only suppose to be out there for 2 weeks.... 2 months later still not back, so im along way behind where I wanted to be with the project now so if you know anyone please get in touch and I'll let you know what I need doing.
Cheers
Cheers
#85
Group a rally car restoration
https://passionford.com/forum/genera...ghlight=Wrcjim
Have a look at the above, it details the rebuild of my Group A rally car, might be some help.
Have a look at the above, it details the rebuild of my Group A rally car, might be some help.
#86
Wahay!! I've lost my Virginity!!
Thread Starter
https://passionford.com/forum/genera...ghlight=Wrcjim
Have a look at the above, it details the rebuild of my Group A rally car, might be some help.
Have a look at the above, it details the rebuild of my Group A rally car, might be some help.
#87
Wahay!! I've lost my Virginity!!
Thread Starter
UPDATE. Just picked up the group A magnesium rear beam that was originally off one of the Michelin/Pilot cars, from Mark at MT Motorsport big thanks to mark learnt a lot about the car today and the way i'm going to take it, so I got it booked in with Geoff at R.E.D at the end of June for the rest of the fabricationafter the person who was suppose to be doing it messed me around But its starting to take shape now
I'll try and get a few pics on over the weekend of the progress so far, but here's a pic of the mag rear end.
Cheers Ben
I'll try and get a few pics on over the weekend of the progress so far, but here's a pic of the mag rear end.
Cheers Ben
#88
Wahay!! I've lost my Virginity!!
Thread Starter
Getting the engine bay and bulk head cleaned up today, so far got the front of the battery tray trimmed back inline with the bulk head ready for the x brace to come through to the strut tops. Just abit of welding to do on it this afternoon and that's another job ticked off the list
Before-
AFTER -
Before-
AFTER -
Last edited by bmillward; 26-05-2013 at 10:13 AM. Reason: update
#92
Wahay!! I've lost my Virginity!!
Thread Starter
Yeah It was suppose to be done 2 month ago, but because I have been messed around with welding I couldn't get it done. But it was always going to get another acid dip before it got its e-coating.
It does look bad on camera, but it's only slight surface rust and mostly brushes off. Trust me i've been keeping an eye on it lol so its not doing any damage, but hopefully get it done in the next few weeks.
It does look bad on camera, but it's only slight surface rust and mostly brushes off. Trust me i've been keeping an eye on it lol so its not doing any damage, but hopefully get it done in the next few weeks.
#94
Wahay!! I've lost my Virginity!!
Thread Starter
#97
I've found that life I needed.. It's HERE!!
Join Date: May 2007
Location: ballymoney co"antrim northern ireland
Posts: 1,092
Likes: 0
Received 3 Likes
on
3 Posts
hi, for fabb work i would speek to gordon vincent, at acs, he did fab work on lots of the wrc and grp a escorts back in the day, he still does them to date, top man at the job, i would only use him for that kind of a job.
here is a photo of some of his handy work, full wrc spec into a jwrc fiesta .
wrc front suspenion tops, and wrc/grpa engine mounts
wrc rear turets. and suspenion pick up points
gordon vincent 01376513419
thanks steven
here is a photo of some of his handy work, full wrc spec into a jwrc fiesta .
wrc front suspenion tops, and wrc/grpa engine mounts
wrc rear turets. and suspenion pick up points
gordon vincent 01376513419
thanks steven
Last edited by steven mc kay; 27-05-2013 at 06:19 PM.
#98
Wahay!! I've lost my Virginity!!
Thread Starter
Got a bare engine built up and a box strapped to it, ready for it to be used as a mock up for the new chassis engine mounts to be welded in and to make sure there's enough clearance for the roll cage front cross, hopefully drop it off with Geoff at R.E.D in the next month and then it'll start moving forward again
#100
Wahay!! I've lost my Virginity!!
Thread Starter
The Shell engine +box all loaded up, ready to drop off with Geoff at R.E.D in the morning, finally starting to get the project moving again after a few months of waiting for parts etc.
#102
Wahay!! I've lost my Virginity!!
Thread Starter
#104
Wahay!! I've lost my Virginity!!
Thread Starter
#106
Wahay!! I've lost my Virginity!!
Thread Starter
Been a long long while since ive had chance to get on here. Bit of an update on the escort. Its been dipped and e-coated and we've finally got it back home. Its booked in for spraying at Kartek in the middle of February and then to Rick at Dogtooth graphics to get all the graphics put on Here's a few pic's of it been stripped again and where its at atm.
http://i1340.photobucket.com/albums/o736/Bmillward20/1_zps3c234522.png[/IMG]
http://i1340.photobucket.com/albums/o736/Bmillward20/1_zps3c234522.png[/IMG]
#109
Passionford Addict
#114
Wahay!! I've lost my Virginity!!
Thread Starter
#117
Wahay!! I've lost my Virginity!!
Thread Starter