3dr cosworth!! Frozen white, carbon roof, caged, full rebuild an remapped !!15/4/18
#201
PassionFord Regular
Thread Starter
#203
PassionFord Post Whore!!
I used to work at Ferrari and had a mate at Westover Sports Cars, one of our customers, who also did TVR gave me the part no. for the pads, which I then cross-referred that to a variety of cars, including the Clio V6... I got a set of OMP pads on eBay for I think, about Ł30
If you know what model Maserati they came off, try an get the part no. I remember that Ferrari 360's had a very similar looking caliper, I bet they'd be the same... Aren't MK1 Focus RS's fitted with Brembo callipers?
If in doubt, draw round the pad and see if you can get a match from a pad manufacturer...
I don't know the Maserati part no, as my dept was mainly Ferrari, but I'll try racking my brains for the 360 number and see what I can find...
If you know what model Maserati they came off, try an get the part no. I remember that Ferrari 360's had a very similar looking caliper, I bet they'd be the same... Aren't MK1 Focus RS's fitted with Brembo callipers?
If in doubt, draw round the pad and see if you can get a match from a pad manufacturer...
I don't know the Maserati part no, as my dept was mainly Ferrari, but I'll try racking my brains for the 360 number and see what I can find...
#204
PassionFord Regular
Thread Starter
I used to work at Ferrari and had a mate at Westover Sports Cars, one of our customers, who also did TVR gave me the part no. for the pads, which I then cross-referred that to a variety of cars, including the Clio V6... I got a set of OMP pads on eBay for I think, about Ł30
If you know what model Maserati they came off, try an get the part no. I remember that Ferrari 360's had a very similar looking caliper, I bet they'd be the same... Aren't MK1 Focus RS's fitted with Brembo callipers?
If in doubt, draw round the pad and see if you can get a match from a pad manufacturer...
I don't know the Maserati part no, as my dept was mainly Ferrari, but I'll try racking my brains for the 360 number and see what I can find...
If you know what model Maserati they came off, try an get the part no. I remember that Ferrari 360's had a very similar looking caliper, I bet they'd be the same... Aren't MK1 Focus RS's fitted with Brembo callipers?
If in doubt, draw round the pad and see if you can get a match from a pad manufacturer...
I don't know the Maserati part no, as my dept was mainly Ferrari, but I'll try racking my brains for the 360 number and see what I can find...
#205
PassionFord Regular
Thread Starter
done a few more bits had the flywheel refaced, Painted and sanded the rocker myself an think it turned out really good. Got some indicator an fog light clips so be looking top notch when it out of paint!
#206
PassionFord Post Whore!!
Rocker Cover has come up really well!!
#207
PassionFord Regular
Thread Starter
thanks mate! aint had time to look at pads yet but i will as its guna save me money lol
#208
PassionFord Regular
Thread Starter
Hi guys been busy gettin stuff ready for the car WEN i get it back, as there takin the piss now! Been down to test fit the roof make sure it all fits rite an does took a pic of the bumper all sanded not fin yet tho. painted the wheels an dunno if i lik the colour yet but try them on the car. Had new uprated braided fuel pump an fan looms, battery tray for boot, clutch release bearing, number plates. had new padding for the rollcage aswel. put some parts on the engine ready aswel also painted my front splitter satin black looks good an a built not bought sticker but can always remove as dont think looks rite lol
#210
PassionFord Regular
Thread Starter
Been to the body shop an the shell is in primer on the weekend! They wrote wot they think RS means on were the windscreen should be wankers lol. got a pair of base model headlights also new borrowed a pic of steve the plumbers car as havent got one of them an having same splitter etc as him sorry but thanks!
#214
PassionFord Regular
Thread Starter
#216
PassionFord Regular
Thread Starter
#217
PassionFord Regular
Thread Starter
Been doin a few more bits an been down bodyshop today an the car was in the booth! An all the other bits in primer ready so gettin there. Done the intercooler in black, clean up mirror bases an pianted them satin black. Had cable for battery to go in the boot off lee2cossies thanks! Done my alloys again an there really nice bit of anthracity, black, bronze colour but only in some lights. An some 5point schroth harnesses so all coming along!
#223
PassionFord Regular
Thread Starter
Bit more done an its exciting most of it was painted the other day an it looks awesome!!! Today the carbon roof is no longer staying on the spare bed its stuck on the car! An looks really good against frozen white even fitted the back lights to make it look like a car again. She is goin to look A1 wen its finished wiv paint an the newly painted alloys Wish it was goin to rs combe on sat but be fully done for next year so guna look forward to that!
https://scontent-lhr3-1.xx.fbcdn.net...b9&oe=562B41CC
https://scontent-lhr3-1.xx.fbcdn.net...b9&oe=562B41CC
Last edited by bull-turbo; 01-07-2015 at 06:31 PM.
The following users liked this post:
Focosmitch (19-07-2015)
#226
PassionFord Regular
Thread Starter
#227
PassionFord Regular
Thread Starter
Bit more done shell all done, havin the shell back with doors on next week to fit engine an seats, dash an stuff. Then back down for the rest to be put on! lookin lik a proper car again sort of.
From this to this!!
From this to this!!
#228
PassionFord Regular
Thread Starter
hi guys been bit more progress with the painting, most the kit painted aswel now. Few more bits bought aswel new harness eyes an backing plates, oil pressure gaug, Snap off boss an new omp steering wheel an new sierra rs cosworth boot sticker
#230
PassionFord Regular
Thread Starter
Ye it does thanks mate! Ye had to put the rear lights on just to see how it looked haha. Guna look awesome with the rest the kit on