1959 anglia 100e
#44
Part of the Furniture
Thread Starter
well has been ages since i updated this so heres a quick one. will just throw pics up as there are a few
And something i picked up from my workmate this will be giving me some fun on roundabouts
Some wheels i may use, not sure yet. they did not cost me much money anyway
An interior i won quite cheap on ebay, recovered about a year ago and stored since. Also came with anew carpet and door cards
And something i picked up from my workmate this will be giving me some fun on roundabouts
Some wheels i may use, not sure yet. they did not cost me much money anyway
An interior i won quite cheap on ebay, recovered about a year ago and stored since. Also came with anew carpet and door cards
#45
Part of the Furniture
Thread Starter
I have decided i dont like the 4 link boxes so am making some new ones and lifting them into the shell a bit more, So here are some pics of the cutting and new boxes
New mounts for the shocks to go on the axle and also the new 4 link box plates
New mounts for the shocks to go on the axle and also the new 4 link box plates
#46
Part of the Furniture
Thread Starter
And finally for now the new boxes just held in place, They still need a little bit more fettling but are looking good so im happy
Passenger side
Drivers side
Passenger side
Drivers side
#51
Part of the Furniture
Thread Starter
#52
Part of the Furniture
Thread Starter
Again i have eben a bit slack with this car, been playing with my new jump bike too much So heres some more pics of the rear axle work. Watts link and 4 link boxes tacked on to check it all works and also the shock mounts are coming along now
And the seats still fits
Watts link tacked on
I definately need a new prop, mine is a little long
And the seats still fits
Watts link tacked on
I definately need a new prop, mine is a little long
#53
Part of the Furniture
Thread Starter
My brand new black top engine has also arrived
brand new airbox/maf and engine bay wiring loom
The towers
a weld i was fairly happy with and once its welded in the car i wont ever see it again
And finally with the damper sat in place, as you can see i still need to make the tops up
brand new airbox/maf and engine bay wiring loom
The towers
a weld i was fairly happy with and once its welded in the car i wont ever see it again
And finally with the damper sat in place, as you can see i still need to make the tops up
#59
Happily retired
Blimey the memories.
My 100e was less than 5years old & still modern , 1172cc side valve, when I owned it.
Love the conversions to these classic shaped cars, looks as if it will be a well Specced car, I wish you all the best with it
Cheers Rod
My 100e was less than 5years old & still modern , 1172cc side valve, when I owned it.
Love the conversions to these classic shaped cars, looks as if it will be a well Specced car, I wish you all the best with it
Cheers Rod
#60
Baby Cheesus
iTrader: (4)
Dan works for Caged, the guys that used to make the chassis' for caterham, and more importantly, the guys that made the roll cage for my 3dr
if you cant guess, they make roll cages for motorsport use lol
www.therollcagepeople.com
#64
Part of the Furniture
Thread Starter
Thanks for the nice comments as fudge said i am a fabricator for a living which definately helps. I am hoping to trailer it into the workshop at work in the enxt couple of weeks to do all the welding on the rear and also try and get the tunnel/bulkhead all finished in one hit. Will then be back onto the front suspension again to finalise the spec of that
Cheers Dan
Cheers Dan
#66
Part of the Furniture
Thread Starter
well my boss went to new york for xmas on friday so that ment the anglia came into work
Strut tops done
Towers tacked in place
I then added some bracing between the two to keep them in their place, also helps take some strain off the arches
Strut in place
And back down on the floor, finally with working suspension. I ended up welding all the 4 link boxes, strut towers and some other bits id cut out
Hopefully this week i will get the bulkhead/tunnel nailed as well
Thanks for looking
Strut tops done
Towers tacked in place
I then added some bracing between the two to keep them in their place, also helps take some strain off the arches
Strut in place
And back down on the floor, finally with working suspension. I ended up welding all the 4 link boxes, strut towers and some other bits id cut out
Hopefully this week i will get the bulkhead/tunnel nailed as well
Thanks for looking
#72
Part of the Furniture
Thread Starter
thanks a lot for the comments people im quite liking how it looks on the wheels. As its in at our workshop i have done a little bit of work on it today and tonight. Got a little bit of the tunnel done
#75
Part of the Furniture
Thread Starter
I have got some ideas about colour, possibly a blue as my girlfriend has approved that the wheels i think will be staying but will be powdercoated a dark colour
Well the last couple of days ive put a few hours in on the car, have made some fairly good progress. I hate making bulkheads, they just are a headfuck trying to get thigns in the right places. Anyway here are some pics
Thanks for looking
Dan
Well the last couple of days ive put a few hours in on the car, have made some fairly good progress. I hate making bulkheads, they just are a headfuck trying to get thigns in the right places. Anyway here are some pics
Thanks for looking
Dan
#78
Part of the Furniture
Thread Starter
Bit of an update, have been working on the car a bit after work this week so have made a start on the braking side of things, also finished off mounting the handbrake and a couple more little bits. So heres some pics
I have raided the caterham parts bin at work and liberated the master cylinder, windscreen wiper and a selection of pedal blanks to start on my pedal box
Thats it for now, more once ive done a bit on the pedalbox
Cheers Dan
I have raided the caterham parts bin at work and liberated the master cylinder, windscreen wiper and a selection of pedal blanks to start on my pedal box
Thats it for now, more once ive done a bit on the pedalbox
Cheers Dan
#79
Advanced PassionFord User
Join Date: Jul 2005
Location: thurso far far north of scotland
Posts: 1,709
Likes: 0
Received 0 Likes
on
0 Posts
just found out my cousins man has just bought one of these and is going to run a yb and mk2 escort rear axle the front end has already been modified to take bigger engines so its just rear end he has to convert