Weber TLDM Idle Mixture
#1
Virgin
Thread Starter
Join Date: Jan 2012
Location: Dorset, England
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Weber TLDM Idle Mixture
I've recently acquired a Mk4 Escort fitted with one of these carbs and thought I'd better check everything's setup correctly so earlier I had a go at adjusting the idle mixture with a colortune. The screw I used is the one shown in this diagram, correct?
http://www.gowerlee.dircon.co.uk/TLDMtype.html (6)
The screw will only adjust roughly 2 turns in and out before going stiff and it seems to make absolutely no difference, am I doing something wrong?!
Thanks.
http://www.gowerlee.dircon.co.uk/TLDMtype.html (6)
The screw will only adjust roughly 2 turns in and out before going stiff and it seems to make absolutely no difference, am I doing something wrong?!
Thanks.
#2
Ben
I've got problems with mine at the minute, running far too lean! My mixture screw also doesn't seem to do anything, quite irritating!
Thread
Thread Starter
Forum
Replies
Last Post