![]() |
|
|
Sign in using an external account
|
|
||||||||
| Register | Photos | KBase | Gold & Trader Accounts | FAQ | Search | Today's Posts | Mark Forums Read | Garage | Vendors |
| Ford Sierra / Sapphire / RS500 Cosworth This forum is for discussion of all things pertaining to the Ford Sierra Cosworth. |
![]() |
|
|
Thread Tools | Search this Thread | Display Modes |
|
|
#1 | ||||
|
15000
|
|
||||
|
|
|
|
|
#2 |
|
PassionFord Post Whore!!
|
If you buy a kit the pipes dictate where they should fit
As far as i'm aware when doing mine with a kit from AS Looking at the oil modine the left pipe - back of head (next to blue sensor) right pipe - bottom pipe on bulkhead top pipe on bulkhead - metal pipe that runs along the head |
|
|
|
|
|
#3 |
|
15000
|
Thanks for reply. The kit i have bought is telling me exactly what you've said and the reason i asked is that the hoses i took off were the opposite way. Maybe the previous owner fitted them the wrong way when he replaced the engine after painting the car
|
|
|
|
|
|
#4 |
|
PassionFord Post Whore!!
|
It's a good chance, not sure if theirs a correct way round on the modine - but go with what you have
|
|
|
|
|
|
#5 |
|
Virgin
|
I have converted a 2wd to a 4wd with a/c. Can someone please assist how to fit the water pipe from water pump onwards. thanks
emile Last edited by emilegarage; 01-05-2012 at 02:35 PM. |
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|