Wheels and Tyres Wheels and Tyres for all Ford's

mk2 focus RS rims on mk2 ST

Thread Tools
 
Search this Thread
 
Old 30-03-2018, 08:06 PM
  #1  
carbon1993
I'm Finding My Feet Here Now
Thread Starter
 
carbon1993's Avatar
 
Join Date: Feb 2013
Location: Netherlands
Posts: 139
Received 2 Likes on 2 Posts
Default mk2 focus RS rims on mk2 ST

Hello,

Anyone fitted focus RS rims on their ST? Bought RS rims for my ST but they barely fit.
The car is completly stock suspension wise.

So they need some spacers. But does annyone knows which spacers to run?
Got 1mm space at the front between the shock and wheel.
At the rear they rub the shock cover and inner wheel arch tub.

Did some trial fitting at the front i need 3mm spacers and 5mm for the rear to clear.

The hub centres that stick in the rim are 1.1mm. The rims have a skewed side of 3mm at the centre bore of the rim.
If i stick some 5mm spacers on it the hub will stick 1.5mm in the centrebore to centre it. Seems like a bit dangerous...

Anyone experience or tips to fit these rims safely?
Old 30-03-2018, 08:42 PM
  #2  
smiley
PassionFord Post Troll
 
smiley's Avatar
 
Join Date: Jun 2010
Location: england
Posts: 3,028
Received 327 Likes on 306 Posts
Default

Hi my mate has a unit next to a guy that has a lot of the st owners club boys come by daily a good few st's running rs rims the guy that owns the unit runs one on these also if you don't get the info you need I will ask him for you when I next see him possibly tomorow
Old 30-03-2018, 09:06 PM
  #3  
carbon1993
I'm Finding My Feet Here Now
Thread Starter
 
carbon1993's Avatar
 
Join Date: Feb 2013
Location: Netherlands
Posts: 139
Received 2 Likes on 2 Posts
Default

That would be great! would really appreciate that !!!
Old 30-03-2018, 10:54 PM
  #4  
smiley
PassionFord Post Troll
 
smiley's Avatar
 
Join Date: Jun 2010
Location: england
Posts: 3,028
Received 327 Likes on 306 Posts
Default

No problem mate
Old 31-03-2018, 07:14 AM
  #5  
RichieST
15K+ Super Poster!!
iTrader: (2)
 
RichieST's Avatar
 
Join Date: Aug 2004
Location: Wiltshire
Posts: 18,732
Received 449 Likes on 397 Posts
Default

Yes you will need spacers to cure clearance issues. I used 15mm eibach hubcentric spacers on mine.

Old 31-03-2018, 09:53 AM
  #6  
smiley
PassionFord Post Troll
 
smiley's Avatar
 
Join Date: Jun 2010
Location: england
Posts: 3,028
Received 327 Likes on 306 Posts
Default

Just seen him as above 15mm ideally 20mm all round he said not to use denso they snap use eibach or h&r racing
Old 02-04-2018, 07:41 PM
  #7  
STeve
Moderator




iTrader: (11)
 
STeve's Avatar
 
Join Date: Jan 2004
Location: Weymouth
Posts: 46,014
Received 864 Likes on 692 Posts
Default

recently ditched my frs rims as did not like using spacers and bought aftermarket with a et of 40 instead
Old 05-04-2018, 09:36 PM
  #8  
carbon1993
I'm Finding My Feet Here Now
Thread Starter
 
carbon1993's Avatar
 
Join Date: Feb 2013
Location: Netherlands
Posts: 139
Received 2 Likes on 2 Posts
Default

Thanks for the reply's! Which spacers did you use. Ones with studs in the spacers or studless spacers? Do you need to cut the studs when fitting 15 or 20mm spacers? or did you replace the stock studs with longer ones?
Old 07-04-2018, 06:15 PM
  #9  
STeve
Moderator




iTrader: (11)
 
STeve's Avatar
 
Join Date: Jan 2004
Location: Weymouth
Posts: 46,014
Received 864 Likes on 692 Posts
Default

you need hubcentric if going spacer route and always chose quality like eibach or h&r, slip over spacers are pure rubbish
Old 19-04-2018, 08:46 PM
  #10  
carbon1993
I'm Finding My Feet Here Now
Thread Starter
 
carbon1993's Avatar
 
Join Date: Feb 2013
Location: Netherlands
Posts: 139
Received 2 Likes on 2 Posts
Default

got some H&R spacers on it 2cm all round. slightlty rubbing on the right front. Hope it get's fixed with a litle alignment.

Thanks for the help!
Old 20-04-2018, 08:00 AM
  #11  
STeve
Moderator




iTrader: (11)
 
STeve's Avatar
 
Join Date: Jan 2004
Location: Weymouth
Posts: 46,014
Received 864 Likes on 692 Posts
Default

Originally Posted by carbon1993
got some H&R spacers on it 2cm all round. slightlty rubbing on the right front. Hope it get's fixed with a litle alignment.

Thanks for the help!
normally fit 12/15mm on the front for this reason as 20 is a tad wide
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Stu @ Claims Care Centre
Ford RS Cosworth Parts for Sale
1
18-05-2009 10:27 AM
mercury grey minter
General Car Related Discussion.
28
20-11-2007 05:53 AM



Quick Reply: mk2 focus RS rims on mk2 ST



All times are GMT. The time now is 02:54 AM.