***Remap for kit car 650kg looking for 400bhp+ zetec
#1
15000
Thread Starter
***Remap for kit car 650kg looking for 400bhp+ zetec
Hi guys
Have lots and lost of question's for my Ford Focus based kit car. Any help will be appreciated.
Need a recommendation for a tuner, someone that has good experience mapping a car with light weight and high power….. current power is estimated at 240--270 BHP, im looking to achieve 400bhp controlling power through a electronic boost controller, 200bhp for track use its enough for me, full 400 for the odd straight line sprint. Based on the below spec what do you guys think. And which company has the experience to take this on light weight-->high power.
Kit car kerb weight: 600ish estimated
Current power: 240--270
Engine spec: blacktop zetec….Accralite pistons..turbo forged rods.apr stud..copper head gasket...poilshed head….bosch 750 injectors...t34 turbo (surprised very little lag)….3inch exhaust….fancy fuel pump will get spec... do i need anything else for 400bhp
Gearbox MK1 ford focus with Quaife 8 paddle clutch.
I also need to get the following fitted. And dont have the time is there anyone that is reasonable labour charges that will fit these for me? Im based in west london but willing to travel for the right mapper.
Electric Boost controller
Fabricate a new bracket for the intercooler, current one snapped.
HKS SSQV dump valve (the kid in me wants dump valve ad rev limiter :0)
Omex rev limiter
Thanks Again.
<!--td {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}-->
Have lots and lost of question's for my Ford Focus based kit car. Any help will be appreciated.
Need a recommendation for a tuner, someone that has good experience mapping a car with light weight and high power….. current power is estimated at 240--270 BHP, im looking to achieve 400bhp controlling power through a electronic boost controller, 200bhp for track use its enough for me, full 400 for the odd straight line sprint. Based on the below spec what do you guys think. And which company has the experience to take this on light weight-->high power.
Kit car kerb weight: 600ish estimated
Current power: 240--270
Engine spec: blacktop zetec….Accralite pistons..turbo forged rods.apr stud..copper head gasket...poilshed head….bosch 750 injectors...t34 turbo (surprised very little lag)….3inch exhaust….fancy fuel pump will get spec... do i need anything else for 400bhp
Gearbox MK1 ford focus with Quaife 8 paddle clutch.
I also need to get the following fitted. And dont have the time is there anyone that is reasonable labour charges that will fit these for me? Im based in west london but willing to travel for the right mapper.
Electric Boost controller
Fabricate a new bracket for the intercooler, current one snapped.
HKS SSQV dump valve (the kid in me wants dump valve ad rev limiter :0)
Omex rev limiter
Thanks Again.
<!--td {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}-->
Last edited by turbo2015; 09-07-2018 at 01:09 PM.
Thread
Thread Starter
Forum
Replies
Last Post
apac
General Car Related Discussion.
0
30-05-2013 05:12 PM