bigbro

hi i have a mk2 orion 1600cvh and i am trying to fit xr3i clocks but have got stuck on the plugs so is there any chance some1 knows what each wire is for as it has xr3i plugs that need to run into mk2 orion loom

white plug

wire 1 brown/white stripe
wire 3 blue/white stripe
wire 4 brown/green stipe
wire 5 brown/yellow stripe
wire 6 brown/black stripe
wire 8 black/yellow stripe
wire 10 brown
wire 11 brown/black stripe

blue plug

wire 1 grey
wire 2 green
wire 3 brown x2
wire 4 black/yellow stripe
wire 6 blue
wire 9 black/green stripe
wire11 black/white stripe
wire 12 brown x2

any help is very appriciated

orion_crazy_carl

iTrader: (3)

hi mate, have u got the poverty spec clocks and your fitting some clocks with a rev counter??I will assume you are! heres a couple of pics of where the wires should go, the red one u dont use as its a live for the clock!I think u may need to link a earth wire over, U can easily pull the wires out of the plugs, so dont cut them.I hope this is what your doing otherwise i feel a bit of a dick any help just ask....done this a million times.

bigbro

Hi orion_crazy_girl I am trying to find out what every wire is for so I can wire it into my mk2 orion the clocks I have now are standard 1600 clocks without a rev counter and the clocks I am trying to fit are xr3i ones

orion_crazy_carl

iTrader: (3)

take the wires out, use the pictures as a reference to where each one goes,simples!

bigbro

Thanks will try after weekend as I'm going to a show sunday

16vzetec

get haynes manual for 3i

adampotten

Hiya I'm also doing this I have a escort mk4 pop the one with the clock in the dash, I'm just wondering as I have seen on here before something to do with getting the rev counter to work as I have the 1.3 ohv could anyone help me out here.
Adam

orion_crazy_carl

iTrader: (3)

green wire off the EDIS , or off one side of the coil, depending on if u got EFI or MFI clocks

adampotten

How would i know the difference between the clocks, the only thing i can think of is that my fuel gauge is on the right.
Cheers mate