Ray Bentos Redfern

My father in law has a beautiful cosworth that won't start. He has tried everything, replaced everything he can. Spoke specialists and no joy. Is there a specialist in the Scotland area? To get it back on the road would make is day. he thinks it may be the jets? Any advice would be gratefully appreciat

ed. Cheers.

S2gogs

Sitec racing in rosyth.

fuzzy

rjm in glenrothes used to do all the work to my cosworth engine for a while.clive and roy. where ok it time and quality but price could sometimes be a bit high.

big hyndy

iTrader: (1)

Sitech Racing, Performance HQ, MV Turbos are all dab hands in the world of YB power.

big hyndy

iTrader: (1)

Pm me if you need more help fella I will give you my number.

fuzzy

are mv turbos still on the go? i thought he shut that down a while ago?

big hyndy

iTrader: (1)

Fuzzy, John Muir is still trading but gave up the garage (MV Turbos) to build houses on. Still on the go and his details can be found on the interweb under MV Turbos. He uses the garage along the road from my mates own garage in Dunfermline town centre.

KSA-Cossie

iTrader: (4)

John knows his stuff and has a wicked sense of humour

fuzzy

i once went into him to get a quote on fitting the cosworth engine into my bmw. he didnt phone back when he said he would. when i went back in again he again didnt phone back so i thought fuck it, he obviously doesnt want the work. never been back.that was at his old place.

fordrs2005

iTrader: (4)

It wouldn't be me taking it to sitech anyway

As said above think John Muir will be the man for the job in that area

big hyndy

iTrader: (1)

How come mate?

martysmartie

iTrader: (1)

Do you have fuel/spark?

Martin

fordrs2005

iTrader: (4)

Just from speaking to him myself when going to book a job in I wasn't convinced so never used the place , also various other reason that are not my place to say on a public forum

But I wouldn't recommend them IMO

sierra cosworh 24v

maxwell racing developments in burnt island are good

bezo

Burntisland? Aren't they in buckhaven?

Fezman1

iTrader: (1)

I thought jock maxwell was more into the older stuff - mainly pintos & stockcar racing engines/prep. etc

Fezman1

iTrader: (1)

I would be morethan happy to come take a look at her for you if you would like. Or a garage I would recommend - its not in the fife area, but stirling. SWR Autos.
Top guys who realy know there way around a cosworth.

CheeRS Fraser

KSA-Cossie

iTrader: (4)

You handy with the spanners Fraser ?

PEABUM

Hey folks! Is there any where in fife that does wiring looms! My man has a escort cossie and needs a engine bay wiring looms! Can anyone recommend any where! Thanks
lynsey

boost monster

Danny Mackenzie auto spark in Dunfermline I've used hime a few times and thought his prices were good.

matthewpickup

I got mine from cw looms , very good job with no problems from them , google cw looms and you should find there page .

Si74

iTrader: (1)

John Muir,lol put the car in for a new exhaust, nuts off studs, way too much hassle. Came back with half the threads for the exhaust manifold into the head stripped. Long time ago but surprised nobodies ended the sarky c-nts existence before now.
RJM, total waste of time after Derek wasn't there, had the cheek to tell me they were only doing me a favour as they didn't work on this old sh-t anymore, thank christ, had the car for 3 months, came back and started twice,plugs oiling up, fuel distributor knackered, no voltage to the auxilliary air valve, brake pipes done by a monkey, waste gate adj. nut hard on the stops at the wrong end, exhaust stud on turbo stripped, wouldn't trust them to change my oil.
Falkland Performance, lol I hope they are all dead!
AVA, I don't want to know the output, just want it tuned, minutes later, pedal to floor with a shitty wee fan in front, two weeks later head gasket went.
Ever gets finished going to Stuart in Stirling who looks after my mates Porsche, fingers crossed!