RS1600i zetec turbo restore - update 01-05-07
#521
my mates just bought a minta from down road y reg it is only dash is badly cracked and just small things am after a seies one psf arch mines cracked on s1 van got them bolts ok will u keep eyes open for good dash thanx
#523
10K+ Poster!!
Thread Starter
Series 1 van, i'll bear you n your yard in mind for bits in the future if i hear of a nice tidy dash for your van i'll let you know mate
where is your yard by the way ?
where is your yard by the way ?
#527
10K+ Poster!!
Thread Starter
got this off TONY C cos somebody drilled mine for an alarm LED
seam welded the middle section of the floor and patched a whole on the passenger side
seam weded the rest of the front and patched up the holes
seam welded the middle section of the floor and patched a whole on the passenger side
seam weded the rest of the front and patched up the holes
#537
Advanced PassionFord User
Join Date: May 2004
Location: Bexhill, East Sussex
Posts: 1,789
Likes: 0
Received 0 Likes
on
0 Posts
Who's going to be building the cage then?
Great stuff with all the work done so far - come along way from when you got it stripped down!
Andy
Great stuff with all the work done so far - come along way from when you got it stripped down!
Andy
#538
10K+ Poster!!
Thread Starter
yeah cage deffo makes sense been looking at Safety Devices, Roll Centre or somewhere else i cant think of the name for, but im open to others, just need to find the best priced one that fits the bill and i'll have it
#540
10K+ Poster!!
Thread Starter
Originally Posted by heeman10
Will your cage be incorporating that mysterious silver bottle too? It's great seeing the car come together like this
#541
Too many posts.. I need a life!!
Join Date: Feb 2005
Location: glasgow
Posts: 508
Likes: 0
Received 0 Likes
on
0 Posts
http://cgi.ebay.co.uk/FORD-ESCORT-RS...QQcmdZViewItem
saw these on ebay mate and thought these might be of interest to you,thats if you've not already got some
this is really going to be something special when its finished
saw these on ebay mate and thought these might be of interest to you,thats if you've not already got some
this is really going to be something special when its finished
#542
10K+ Poster!!
Thread Starter
russellsmith, cheers for that mate ive already got my kit tho thanks
been out shopping today and bought the tubing for my rear strut brace, check it out all finished now
been out shopping today and bought the tubing for my rear strut brace, check it out all finished now
#545
10K+ Poster!!
Thread Starter
made a start on the rear strut brace this afternoon, didnt have a great deal of time so not much done.
strut brace in position
this diagonal brace needs to be tweaked a bit as its still not where i want it, job for another day.
strut brace in position
this diagonal brace needs to be tweaked a bit as its still not where i want it, job for another day.
#548
I'm Finding My Feet Here Now
Join Date: Aug 2005
Location: derbyshire
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
hi red did you get them stripes from fordgraphics on ebay? are they any good cos i wnat an s1 kit for my xr3i im gonna modify em to say xr3i rather than rs turbo just wondered what they compare to standard like. let me know mate. and get ya finger oot!
#549
10K+ Poster!!
Thread Starter
no dan, the sticker kit i bought was from a lad on ebay called ESCRS, he bought the kit from PJG graphics for his RS16i but didnt use them and decided to sell them. ive not used them yet so cant comment on the quality of them, they looked good when i took them out of the tube they came in tho
#557
Wahay!! I've lost my Virginity!!
Join Date: Aug 2005
Location: sunderland
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Red16
started chopping up my 2wd intercoolers last night, so im not that lazy hopefully get the end caps made tonight and then all thats required is a bit of ally welding
#558
10K+ Poster!!
Thread Starter
Originally Posted by Moondust_crust
doin soo well mate, fancy doing mine? , i should really be doing some on mine but ive been told im not allowed
Originally Posted by N1C4T3N
We will be waitin Now get outside and weld son lol
Originally Posted by ssbnreso
Originally Posted by Red16
started chopping up my 2wd intercoolers last night, so im not that lazy hopefully get the end caps made tonight and then all thats required is a bit of ally welding
you work there ?