3 Door Cosworth trackday car
#126
Too many posts.. I need a life!!
Thread Starter
3 door trackday car..engines in!!
No mods needed Vic...I have also fitted a saffy heated screen which required two little cuts in the bottom corners
#132
Too many posts.. I need a life!!
Thread Starter
Originally Posted by dave cos4x4
the dash looks well.
glad you are getting on with it.
glad you are getting on with it.
#135
Too many posts.. I need a life!!
iTrader: (1)
Join Date: Apr 2006
Location: the Netherlands
Posts: 557
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by broadmoor
Originally Posted by dave cos4x4
the dash looks well.
glad you are getting on with it.
glad you are getting on with it.
#136
Too many posts.. I need a life!!
Thread Starter
quick update..
I got all my suspension bits from Gartrac this week..for the front
They are the group 4 Escort struts so i have used granada front hubs as the bodies are wider/thicker..
made some new top mounts and fitted them all up...rears will be done next week .
I got all my suspension bits from Gartrac this week..for the front
They are the group 4 Escort struts so i have used granada front hubs as the bodies are wider/thicker..
made some new top mounts and fitted them all up...rears will be done next week .
#137
Too many posts.. I need a life!!
Thread Starter
Started on the Carbon inside the car now..door panels and and rear qtr panels made..And i having some floor plates made in carbon to tidy the interior up..
ps..and a quick pic of my mates car that is now ready for Brighton speed trials
ps..and a quick pic of my mates car that is now ready for Brighton speed trials
#145
Too many posts.. I need a life!!
Thread Starter
Originally Posted by RS500
Lovely what is the spec of the engine??
#147
Too many posts.. I need a life!!
Thread Starter
Thanks for all the comments..
This will hopefully be the last update as the car is now mostly sorted..
Connected up the battery cables to check the car loom and everything works
Just need to install the Motec engine loom and bobs yer auntie
Sorted out the "road" wheels and will have these sitting right on the arch lips once i have adjusted the castor and camber
So thats it..hope to see a few of you out and about
This will hopefully be the last update as the car is now mostly sorted..
Connected up the battery cables to check the car loom and everything works
Just need to install the Motec engine loom and bobs yer auntie
Sorted out the "road" wheels and will have these sitting right on the arch lips once i have adjusted the castor and camber
So thats it..hope to see a few of you out and about