MRM Speed Shop’s Project CarbonBLOO
The following users liked this post:
Minirotty (16-09-2017)
16-09-2017, 06:46 PM
#42
ffoc.co.uk
I have to agree with everyone else. The car looks savage, do nowt more with the body work as it looks factory fresh as is.
The following users liked this post:
Minirotty (16-09-2017)
16-09-2017, 09:54 PM
#43
Lucifer II - 666
Thread Starter
Thanks mate.
Thank you! Defo happy with her looks, I will keep any changes very subtle now, I'm thinking some carbon touches will help haha
Thank you! Defo happy with her looks, I will keep any changes very subtle now, I'm thinking some carbon touches will help haha
20-09-2017, 02:59 AM
#44
Lucifer II - 666
Thread Starter
Near side rear now done too, only trimmed and prepped atm still in need of paint, but you cant see it unless you stick your head under, rust proofed and zinc primed so at least theyre weather proof, I will spray them with 2pack when I can.
But Im happy nos there done.
Hopefully nuts will arrive tomorrow.
But Im happy nos there done.
Hopefully nuts will arrive tomorrow.
24-09-2017, 12:35 AM
#45
Lucifer II - 666
Thread Starter
What a nightmare!
GrpA nuts arrived that I needed 11/16" and as I already knew in back of my mind, not studs are to short.
So, waiting for them now lol
GrpA nuts arrived that I needed 11/16" and as I already knew in back of my mind, not studs are to short.
So, waiting for them now lol
24-09-2017, 08:04 AM
#46
10K+ Poster!!
I would have said don't paint the tyres but they actually really do look good on the car.
I was surprised to see drum brakes on the rear of a pretty quick and fairly modern car....that said, drum brakes do work pretty well.
I was surprised to see drum brakes on the rear of a pretty quick and fairly modern car....that said, drum brakes do work pretty well.
24-09-2017, 12:00 PM
#47
Lucifer II - 666
Thread Starter
The 4x4's had discs, I'll put discs on at some point.
27-09-2017, 08:30 AM
#48
Lucifer II - 666
Thread Starter
+25mm studs have arrived. Jag is booked in for MOT at a mates tomorrow and whilst I'm there I'm going to ask if he can fit the RS in soon to change these.
28-09-2017, 04:30 PM
#49
Lucifer II - 666
Thread Starter
Changed steering wheel for optional RS one I had in Pikey Van, but as van is now more track focused will fit different one in van, also popped in some smoked side repeaters.
13-10-2017, 11:13 PM
#50
Lucifer II - 666
Thread Starter
New reg to wellcome her to the family fleet!
14-10-2017, 07:57 PM
#51
Lucifer II - 666
Thread Starter
Looks good on!
14-10-2017, 07:58 PM
#52
Advanced PassionFord User
Yes Kev looks great. There's one on eBay "track car" hmm think the wife would kill me.
The following users liked this post:
Minirotty (15-10-2017)
15-10-2017, 12:29 AM
#53
Lucifer II - 666
Thread Starter
Thanks mate, get one! You can never have to many cars lol
I did a group buy on some carbon dash panels a few years ago, I’ve ended up with nearly half of them back for my cars lol got this off a mate today.
I did a group buy on some carbon dash panels a few years ago, I’ve ended up with nearly half of them back for my cars lol got this off a mate today.
15-10-2017, 06:21 AM
#54
Advanced PassionFord User
So nice. Who did the carbon?
15-10-2017, 08:19 PM
#55
Lucifer II - 666
Thread Starter
My mate Psycho Wozza lol
15-10-2017, 08:57 PM
#56
Advanced PassionFord User
I need a carbon dash soooooo bad!
16-10-2017, 09:10 AM
#57
Lucifer II - 666
Thread Starter
Its a downward slipe tho mate once you start lol
08-12-2017, 01:30 AM
#58
Lucifer II - 666
Thread Starter
A mate of mine had somenof his car parts skinned in carbon and another mate I’d seen doing his own.
So thought I’d give it a go... I skinned the rear boot lock strip. Also skinned two roof strips I had loose for Lucifer 2, thought theyd be easier to start with, not easy the firstbtime!
But I’m glad I tried and will be a lot easier next time, I’m quite happy how first lot turned out, takes a long process but if I can get even better it’ll be worthnit.
So thought I’d give it a go... I skinned the rear boot lock strip. Also skinned two roof strips I had loose for Lucifer 2, thought theyd be easier to start with, not easy the firstbtime!
But I’m glad I tried and will be a lot easier next time, I’m quite happy how first lot turned out, takes a long process but if I can get even better it’ll be worthnit.
09-12-2017, 08:14 AM
#60
10K+ Poster!!
Nice work on the carbon
24-12-2017, 02:38 AM
#61
Lucifer II - 666
Thread Starter
Thanks lads
I’ve gotten more confident witge carbon alrrast and have now sone some rear bumper spats and plans to do more.
I’ve gotten more confident witge carbon alrrast and have now sone some rear bumper spats and plans to do more.
24-12-2017, 02:07 PM
#62
Advanced PassionFord User
They loook really good Kev, well done
29-12-2017, 02:08 AM
#63
Lucifer II - 666
Thread Starter
Thanks mate, I flatted and lacquered the dash board now too, now I’ve done this one majes me want to lacquer my other two I have lol
The following users liked this post:
Minirotty (01-02-2018)
01-02-2018, 11:31 PM
#65
Lucifer II - 666
Thread Starter
Who are you on Facebook ?
Well few updates as ever I did a few del boy deals lately and added parts to my cars...
Parts for this one
HiSpec 4pot 320mm bells and rotas
Rear strut brace
Morettes
Cossy bib
RS optional grille
Oae yeh, also added her to my tattoo sleeve with all my other cars lol
Well few updates as ever I did a few del boy deals lately and added parts to my cars...
Parts for this one
HiSpec 4pot 320mm bells and rotas
Rear strut brace
Morettes
Cossy bib
RS optional grille
Oae yeh, also added her to my tattoo sleeve with all my other cars lol
Last edited by Minirotty; 01-02-2018 at 11:33 PM.
06-02-2018, 01:04 AM
#66
Lucifer II - 666
Thread Starter
Found some of my spare door handles I’d been looking for so managed to do them now too...
13-02-2018, 07:07 PM
#67
Lucifer II - 666
Thread Starter
Managed to get a carbon bonnet for RS
It’s got some accident damage but nothing I can’t fix.
It’s one of 2 I had made years ago for some mates.
It’s got some accident damage but nothing I can’t fix.
It’s one of 2 I had made years ago for some mates.
06-09-2018, 03:20 PM
#68
Lucifer II - 666
Thread Starter
Well she’s back on the toad!
I was invited to attend a 50th year of escort show s I out an MOT on her and went along...
all brakes working but I feel something bunding now, so have to strip her and check it out, but she oarked back up now anyway loo
i drove home with my mate in his RS, lets say it was some spirited driving down the lanes lol
I gave her lots of beans and managed to snap a rear coilover srtut on the n/s/r exiting a fast left hander.
But all in Inenjoyed it!
Also won an award! Never won one before lol
pic of me and the wife driving into show acting like kids lol
The following users liked this post:
Minirotty (11-11-2018)
11-11-2018, 10:14 AM
#70
Lucifer II - 666
Thread Starter
11-11-2018, 10:29 AM
#71
10K+ Poster!!
Glad you got the prize.
The following users liked this post:
Minirotty (01-12-2018)
The following users liked this post:
Minirotty (01-12-2018)
The following users liked this post:
Minirotty (01-12-2018)
01-12-2018, 08:05 PM
#74
Lucifer II - 666
Thread Starter
01-12-2018, 08:07 PM
#75
Lucifer II - 666
Thread Starter
Thanks lads but when using to go to wales last weekend only made it down M5 to M50 and head let go
was like a cloud dropped from sky behind me lol got home with help of AA
was like a cloud dropped from sky behind me lol got home with help of AA
01-12-2018, 08:50 PM
#76
Lucifer II - 666
Thread Starter
New wheels also finished and rea
dy to go on but not until Ive got all my carbon finished and ready too
dy to go on but not until Ive got all my carbon finished and ready too
02-12-2018, 07:21 AM
#77
Advanced PassionFord User
Shame about the head mate. Off to ALD for a bit of work while it's off?
those wheels look great.
those wheels look great.
The following users liked this post:
Minirotty (02-12-2018)
02-12-2018, 10:50 AM
#78
Lucifer II - 666
Thread Starter
24-01-2019, 10:52 PM
#79
Lucifer II - 666
Thread Starter
24-01-2019, 10:53 PM
#80
Lucifer II - 666
Thread Starter
Few update pics carbon morettes and carbon front bib and new wheels etc
Ended up fitting a donor engine for now as issues with other head.
More plans to come!
Ended up fitting a donor engine for now as issues with other head.
More plans to come!