MRM Speed Shop’s Project CarbonBLOO
#1
Lucifer II - 666
Thread Starter
MRM Speed Shop’s Project CarbonBLOO
Not posted this up before, but this is another of my esxorts.
Kept/keeping this one road kegal! ATM subtle spec and nice standard engine with what I'd call low mikags RS!
Has coil overs but there not to harsh so keeping them on for now.
Other than also adding my comp FR's she's how I'm happy with her, new tyres going on Friday as current ones are track tyres, just some Toyo's but there good enough as shs's only a cruiser.
But as I can't drive her atm either she'll be going on sxle stands and covered up on drive way for now... but she'll also be pottered around on as there bits I'd like to tidy up to make her perfect.
But I'm sure she'll evolve naturally over the coming hears like all my others have loo
Hope ya like her.
Kept/keeping this one road kegal! ATM subtle spec and nice standard engine with what I'd call low mikags RS!
Has coil overs but there not to harsh so keeping them on for now.
Other than also adding my comp FR's she's how I'm happy with her, new tyres going on Friday as current ones are track tyres, just some Toyo's but there good enough as shs's only a cruiser.
But as I can't drive her atm either she'll be going on sxle stands and covered up on drive way for now... but she'll also be pottered around on as there bits I'd like to tidy up to make her perfect.
But I'm sure she'll evolve naturally over the coming hears like all my others have loo
Hope ya like her.
Last edited by Minirotty; 02-03-2019 at 02:25 PM.
The following users liked this post:
Minirotty (07-09-2017)
#3
Lucifer II - 666
Thread Starter
Thanks man, yeh I agree her looks seem to work real well as she is atm so not gona make massive changes yet, I may fit some morettes at some point but not sure yet as this is the first time I've ever liked the look of standard shape lights in an RS lol
The following users liked this post:
Minirotty (07-09-2017)
#5
PassionFord Post Whore!!
Very nice
Don't see any about nowadays
Don't see any about nowadays
The following users liked this post:
Minirotty (07-09-2017)
#6
Advanced PassionFord User
Never really been a fan of this shape but those wheels do make it look hard as nails. You've too many toys pal!
The following users liked this post:
Minirotty (07-09-2017)
#7
Lucifer II - 666
Thread Starter
Thanks lads, I can't wait to see her tomorrow on proper tyres!
Na, I've worked really hard for a lot of years for what I have now and trying my hardest to keep things also now as I can't work yet, also not being able to work on my own cars is frustrating but I try and enjoy motivating myself by looking at them and posting pics about them lol
Na, I've worked really hard for a lot of years for what I have now and trying my hardest to keep things also now as I can't work yet, also not being able to work on my own cars is frustrating but I try and enjoy motivating myself by looking at them and posting pics about them lol
Trending Topics
#8
Advanced PassionFord User
I can't fault you Kev. Most would have given up in your position. Keep it going you'll be on the spanners again before you know it.
The following users liked this post:
Minirotty (07-09-2017)
The following users liked this post:
Minirotty (07-09-2017)
The following users liked this post:
Minirotty (07-09-2017)
#11
Lucifer II - 666
Thread Starter
You know, I was thinking the same lol
Thanks James bud.
#12
PassionFord Post Whore!!
Join Date: Dec 2009
Location: South of England
Posts: 6,728
Likes: 0
Received 560 Likes
on
522 Posts
That looks real nice, I've never been a fan of this shape escort but you seem to have a knack of making normal cars look awesome, not a lot of people can pull that off mate nice one
The following users liked this post:
Minirotty (08-09-2017)
The following users liked this post:
Minirotty (08-09-2017)
#14
Lucifer II - 666
Thread Starter
I'm not a fan of and will have to be removed is the front lower rubber splitter, not sure what it's off but I really don't like it and it bugs me when I see it lol
The following users liked this post:
Minirotty (08-09-2017)
#16
Lucifer II - 666
Thread Starter
Thanks Markie T
#17
Lucifer II - 666
Thread Starter
Road legal tyres now on, TOYO T1's which look hood man.
The following users liked this post:
Minirotty (08-09-2017)
The following users liked this post:
Minirotty (08-09-2017)
#20
Lucifer II - 666
Thread Starter
Thanks mate, yeh I have a few now lol
The following users liked this post:
Minirotty (09-09-2017)
#23
Lucifer II - 666
Thread Starter
Will get the tyres painted up ASAP mate
#24
Regular Contributor
Ace! I love mk 6 escorts. My first car was a pepper red 1.6 finesse gti rep with morrettes
Dont understand why there isnt more mk 6 fans
Will be an awesome sleeper with that turbo lump in it
Dont understand why there isnt more mk 6 fans
Will be an awesome sleeper with that turbo lump in it
The following users liked this post:
Minirotty (10-09-2017)
#25
Lucifer II - 666
Thread Starter
Peoper red was one of the best colours on the MK6 but vary rare sadly.
I've built a turbo lump in a mates RS2K and its 350ish bhp and goes likenstink! So defo would be good if I put one in this one day, the buikd I have in workshop is good for 450bhp too so would be mental!
She's back on drive now, I had to start work on rear arches breifly yesterday as after night the struts had settled and the rear tyre scunned bad, but all good now and great clearance.
Going to pop to Halfords in a bit for some tyre pens haha
She don't look to bad next to Rusty.
I've built a turbo lump in a mates RS2K and its 350ish bhp and goes likenstink! So defo would be good if I put one in this one day, the buikd I have in workshop is good for 450bhp too so would be mental!
She's back on drive now, I had to start work on rear arches breifly yesterday as after night the struts had settled and the rear tyre scunned bad, but all good now and great clearance.
Going to pop to Halfords in a bit for some tyre pens haha
She don't look to bad next to Rusty.
Last edited by Minirotty; 10-09-2017 at 01:18 PM.
#26
Lucifer II - 666
Thread Starter
Visa-broke... On it mate!
#27
Lucifer II - 666
Thread Starter
All painted accept for the big R at the end of Proxie T1R as I'm waiting on a red pen from eBay.
#29
Lucifer II - 666
Thread Starter
#31
Lucifer II - 666
Thread Starter
Be a while before any photo's of them together will be able to be taken mate lots to do to the van and not able to touch it atm.
Not sure on the cossy splitter idea, I'd like to do something different to this one, I've fitted cossy splitter on every MK6 I've had lol
Not sure which direction I'll go yet but I've got plenty of time to think about it lol
Not sure on the cossy splitter idea, I'd like to do something different to this one, I've fitted cossy splitter on every MK6 I've had lol
Not sure which direction I'll go yet but I've got plenty of time to think about it lol
#32
Im sure they would have sold as well!
here in he US we have a 25 year rule (once a car reaches 25 years old, its eligible for import) R32 skylines are popping up everyhwere it seems
but here in the next few years I would like to import 1 or 2 RS2000. I have always like this and the earlier one.
Photos of cars such as yours are the perfect motivation! keep it up!
here in he US we have a 25 year rule (once a car reaches 25 years old, its eligible for import) R32 skylines are popping up everyhwere it seems
but here in the next few years I would like to import 1 or 2 RS2000. I have always like this and the earlier one.
Photos of cars such as yours are the perfect motivation! keep it up!
#33
Lucifer II - 666
Thread Starter
Thanks bud feel free to contact whenyou want to find some I'd help out.
Red pen arrived today, so did the R's lol
Red pen arrived today, so did the R's lol
Last edited by Minirotty; 12-09-2017 at 04:54 PM.
#34
Advanced PassionFord User
That looks fookin' mint Kev!
The following users liked this post:
Minirotty (12-09-2017)
The following users liked this post:
Minirotty (12-09-2017)
#36
The following users liked this post:
Minirotty (12-09-2017)
#39
Lucifer II - 666
Thread Starter
Thanks lads, sunbtle mods seem to work well with this colour car.
#40
Lucifer II - 666
Thread Starter
Bit of a drama with the wheels! <br/><br/>When my mate fitted um for me I wasn't happy with the GrpA nuts! They didn't fit as to length so I removed 5mm off all nuts but then when bolted up I didn't like the look of the cambered seat. So I've done a bit of research and measuring and found 11/16" nuts with camber washer that look perfect, so hopefully have then this week.
Then next! <br/><br/>When we test fitted the comps with track tyres, they caught the arches and showed me that the arches have been replaced at some point, and done well infact but! who ever prepped it for paint put unnessary filler on the arch lips, just didn't make any sense as under the filler metal work was like new, shape was also fine! Must of been a YTS! So as I don't like rolled arches and I've fitted 8J et15's I've removed the lip and just left 5mm now, so lots of clearance.
Rust treated the metal and etch primed, not got any pint atm but at least untill I have they look good and are weather proofed!