Mk1 Cortina 64 Engine bay measurements
#1
Virgin
Thread Starter
Join Date: Aug 2017
Location: Auckland
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Mk1 Cortina 64 Engine bay measurements
Hi Everyone,
I'm currently restoring my 64 Mk1 Cortina, after removing the motor and cross member, I went to fit another restored (painted) cross member and found it didn't fit. The chassis rails are out and I need the measurements to straighten/move them out. It's out by about 6mm, the rails haven't been repair by the looks, maybe from an old accident during many moons ago.
I'm currently restoring my 64 Mk1 Cortina, after removing the motor and cross member, I went to fit another restored (painted) cross member and found it didn't fit. The chassis rails are out and I need the measurements to straighten/move them out. It's out by about 6mm, the rails haven't been repair by the looks, maybe from an old accident during many moons ago.
#2
PassionFord Post Whore!!
iTrader: (2)
You might get lucky and find someone on here with the sizes, but I reckon that your best bet would be to join Turbosport - loads of old school information on there
http://www.turbosport.co.uk/
http://www.turbosport.co.uk/