Rosso red Rs turbo build and progress.
The following users liked this post:
Rsmat (17-01-2019)
#1083
Advanced PassionFord User
Someone is going to be hooning around this weekend if the weather holds off!!
I bet you’re watching the phone
I bet you’re watching the phone
The following users liked this post:
Rsmat (17-01-2019)
#1086
Advanced PassionFord User
Double post, apologies
The following users liked this post:
Rsmat (17-01-2019)
#1088
PassionFord Regular
Hey man, nearly there. Just had a good read back through as there is so much too this project, retaining the period sound,look and feel of the car with some sweet technology underneath. Just perfect. Best colour too😄.
Done Gus proud on this one pal.
stop chewing your nails😂
Done Gus proud on this one pal.
stop chewing your nails😂
The following users liked this post:
Rsmat (17-01-2019)
#1089
300+
Thread Starter
iTrader: (2)
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,259
Received 583 Likes
on
516 Posts
Hey man, nearly there. Just had a good read back through as there is so much too this project, retaining the period sound,look and feel of the car with some sweet technology underneath. Just perfect. Best colour too😄.
Done Gus proud on this one pal.
stop chewing your nails😂
Done Gus proud on this one pal.
stop chewing your nails😂
ha ha .. cheers mate ..Yea I've no nails left at the min .. how's yours getting on ? I must pop up for a brew soon.
#1090
PassionFord Regular
I've got a bit done, rear end underneath is all in stonechip, (sandblasted it) the rest of the floor is nearly cleaned off. Been busy with little one and work set up,ready for the onslaught. Well my turn to bob over, but welcome anytime.
Found that standard head unit other week, remind me when you see me it's in the steel cabinet, chuck it in your spares pile as it's mint.
Found that standard head unit other week, remind me when you see me it's in the steel cabinet, chuck it in your spares pile as it's mint.
The following users liked this post:
Rsmat (18-01-2019)
#1091
PassionFord Post Troll
This infinate scroll ffs!!! Starts me at page 5 tried loads to get back to were I asked you about Notts lol no chance
#1092
300+
Thread Starter
iTrader: (2)
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,259
Received 583 Likes
on
516 Posts
I've got a bit done, rear end underneath is all in stonechip, (sandblasted it) the rest of the floor is nearly cleaned off. Been busy with little one and work set up,ready for the onslaught. Well my turn to bob over, but welcome anytime.
Found that standard head unit other week, remind me when you see me it's in the steel cabinet, chuck it in your spares pile as it's mint.
Found that standard head unit other week, remind me when you see me it's in the steel cabinet, chuck it in your spares pile as it's mint.
that's awesome to hear mate ..and yea pop down anytime you want or I'll pop up ..and yea that be ace ..I might even stick it in ..looks retro and standard inside .
The following users liked this post:
Rsmat (19-01-2019)
#1098
Boost addict
looks right at home there, what boost are you thinking it will need to hit around 300bhp? Going off what you said it was making on fb the othe day id imagine it could do it at around 20-22psi
#1099
PassionFord Post Troll
Game on
#1102
Rs turbo
aww no way mate. What part is it I can't make it out? Good power though mate 15 psi well of you want to be pedantic 14.5 lol
The following users liked this post:
Rsmat (19-01-2019)
#1103
I've found that life I needed.. It's HERE!!
That’s not so good. But keep focused fix it and get it back. And as I’ve said before if it was easy we would all be doing it.
The following users liked this post:
Rsmat (19-01-2019)
#1104
Advanced PassionFord User
Bugger! Gutted for you mate. Is that the cam seal?
#1106
Advanced PassionFord User
If there is one thing you can guarantee about these cars is they can test you,real pain at times.
Bad luck mate,get a few beers down you and sort another time.
Bad luck mate,get a few beers down you and sort another time.
#1107
PassionFord Post Troll
Sorry to hear this mate
#1109
300+
Thread Starter
iTrader: (2)
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,259
Received 583 Likes
on
516 Posts
Thanks everyone ..I'm bringing it home ..drop the sump and measure what Oil is left in it ...compression check and remove engine and sent for a inspection and 're fresh .
#1110
Advanced PassionFord User
sorry to hear that mat, was hoping you'd be out driving it.
This car is still the one making me want to get another escort. Hoping to import a LHD escort and sapphire in the near future. Stick with it, it will be worth it in the end.
btw you can turn off infinate scroll in the settings, I've done mine as its rubbish.
This car is still the one making me want to get another escort. Hoping to import a LHD escort and sapphire in the near future. Stick with it, it will be worth it in the end.
btw you can turn off infinate scroll in the settings, I've done mine as its rubbish.
#1111
300+
Thread Starter
iTrader: (2)
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,259
Received 583 Likes
on
516 Posts
sorry to hear that mat, was hoping you'd be out driving it.
This car is still the one making me want to get another escort. Hoping to import a LHD escort and sapphire in the near future. Stick with it, it will be worth it in the end.
btw you can turn off infinate scroll in the settings, I've done mine as its rubbish.
This car is still the one making me want to get another escort. Hoping to import a LHD escort and sapphire in the near future. Stick with it, it will be worth it in the end.
btw you can turn off infinate scroll in the settings, I've done mine as its rubbish.
that's awesome to hear mate ..and how do I turn it off as it does my head in also.
The following users liked this post:
Rsmat (19-01-2019)
The following users liked this post:
Rsmat (19-01-2019)
#1115
Too many posts.. I need a life!!
Fantastic Build!
Any dyno plots to post?
I am not sure how the plug could have popped out on its own? Pressure must be making it's way into the crankcase - and not out - breather not breathing.
There should be a vent to atmosphere somewhere. I am sure you will get it sorted!!
Cheers
Any dyno plots to post?
I am not sure how the plug could have popped out on its own? Pressure must be making it's way into the crankcase - and not out - breather not breathing.
There should be a vent to atmosphere somewhere. I am sure you will get it sorted!!
Cheers
#1116
Advanced PassionFord User
Fantastic Build!
Any dyno plots to post?
I am not sure how the plug could have popped out on its own? Pressure must be making it's way into the crankcase - and not out - breather not breathing.
There should be a vent to atmosphere somewhere. I am sure you will get it sorted!!
Cheers
Any dyno plots to post?
I am not sure how the plug could have popped out on its own? Pressure must be making it's way into the crankcase - and not out - breather not breathing.
There should be a vent to atmosphere somewhere. I am sure you will get it sorted!!
Cheers
#1117
300+
Thread Starter
iTrader: (2)
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,259
Received 583 Likes
on
516 Posts
Fantastic Build!
Any dyno plots to post?
I am not sure how the plug could have popped out on its own? Pressure must be making it's way into the crankcase - and not out - breather not breathing.
There should be a vent to atmosphere somewhere. I am sure you will get it sorted!!
Cheers
Any dyno plots to post?
I am not sure how the plug could have popped out on its own? Pressure must be making it's way into the crankcase - and not out - breather not breathing.
There should be a vent to atmosphere somewhere. I am sure you will get it sorted!!
Cheers
#1118
10K+ Poster!!
thanks and no I've no plots .. it had just pulled 253bhp at 1 bar ..and then on another pull the bung let go ..I've got a crank case breather and nothing could have been blocked because it's all new everything ..we can only think it's harmonics and it's worked it's way out as its not popped any other seals in the head .
on the old a series I know they used to tap the blocks to hold seals in place with bolt heads over lapping.
i guess if you rev limit is higher then harmonica play a bigger part?
i hope its an easy fix and no damage was done. You can get companies to test the oil, cant you?
The following users liked this post:
Rsmat (19-01-2019)
#1120
10K+ Poster!!
iTrader: (4)
That is shit news mate, I cant quite make the pic out is that just below the rocker cover in the head ?
What is that hole ? Was it still running ok or did they notice a change ?