Restorations, Rebuilds & Projects. Restoring her to Concourse? Just getting her running again? Or got a mad project? This is your room.

My new sapp..making a start on a make over

Old 14-05-2016, 06:23 PM
  #1  
1374lee
PassionFord Post Troll
Thread Starter
iTrader: (11)
 
1374lee's Avatar
 
Join Date: Jan 2006
Location: WALES
Posts: 2,959
Received 91 Likes on 91 Posts
Default My new sapp..making a start on a make over

I purchased my sapp 10 days ago now, got a shopping list ready of little jobs I wanted sorting out so made a start today.Buckle up here we go again.

Rev counter wasn't working, I had a spare set of clocks so we swapped a few bits over and I now have a rev counter that works, this was the first job today.



Secondly I wanted the aftermarked Kenwood cd player out of the car and refit the original Ford unit which came with the car. The Kenwood didn't work anyway, so binned this.Looked at all the wiring, beleive it or not none of the plugs had been cut and all the original wiring was all intact including the amp the head unit cable, it was all nicely tucked away. So connected it all up and hey presto we had the Ford unit working, I was so pleased all the wiring was uncut, makes things a lot easier then.



Drivers front electic window is a bit noisy, stripped the door card off, greased it all but still the same so gonna replace the window motor.

Removed and cleaned the idle speed control valve as it was a little sticky now and again, better now though.

Finally I found out that the rad fans were not working, so I thought I need this sorting urgently. Purchased a new fan switch, tried it, still no good. Checked all the wiring and bridge out the fans, fans kicked in nicely. Traced it back to a faulty fan relay, luckily my mate had one spare out of his RS500, tried that and all good fans now working perfectly. Then I found that the fan switch plug was cable tied on, somebody had damaged this at some point. So cable tied it on for now, new plug will be on order soon.

Faulty fan relay





That's all for today.

Last edited by 1374lee; 12-07-2017 at 07:55 PM.
Old 14-05-2016, 06:39 PM
  #2  
cozzy jeff
Advanced PassionFord User
iTrader: (4)
 
cozzy jeff's Avatar
 
Join Date: Jan 2007
Location: jara
Posts: 2,294
Received 65 Likes on 60 Posts
Default

got some pics of the car Lee?
Old 14-05-2016, 07:00 PM
  #3  
1374lee
PassionFord Post Troll
Thread Starter
iTrader: (11)
 
1374lee's Avatar
 
Join Date: Jan 2006
Location: WALES
Posts: 2,959
Received 91 Likes on 91 Posts
Default

Originally Posted by cozzy jeff
got some pics of the car Lee?
In the picture section Jeff, posted up earlier this evening.

CheeRS. Lee.
Old 14-05-2016, 10:16 PM
  #4  
timewellnick
Wahay!! I've lost my Virginity!!
 
timewellnick's Avatar
 
Join Date: May 2015
Location: Wellington, Somerset
Posts: 57
Received 3 Likes on 3 Posts
Default

Hi Lee,

That's my mate tims old car you have there, he was sad to see it go, as was I.

Should be a good project for you mate, its quite a tidy one. Looking forward to seeing your progress!

I need to get round to posting a load of photos of how mine is coming along lol

Cheers
Nick
Old 14-05-2016, 10:58 PM
  #5  
1374lee
PassionFord Post Troll
Thread Starter
iTrader: (11)
 
1374lee's Avatar
 
Join Date: Jan 2006
Location: WALES
Posts: 2,959
Received 91 Likes on 91 Posts
Default

Originally Posted by timewellnick
Hi Lee,

That's my mate tims old car you have there, he was sad to see it go, as was I.

Should be a good project for you mate, its quite a tidy one. Looking forward to seeing your progress!

I need to get round to posting a load of photos of how mine is coming along lol

Cheers
Nick
Yes it is indeed Tims old car, he was sad to see it go for sure.Nice fella Tim.It is a very tidy car, will be much better once I've got my claws into the car.Yes I will be ploughing into this soon, plenty more pics and updates to come over the coming weeks.

Thanks. Lee.

Last edited by 1374lee; 15-05-2016 at 12:18 PM.
Old 15-05-2016, 01:58 AM
  #6  
visa_broke
Advanced PassionFord User
 
visa_broke's Avatar
 
Join Date: Nov 2014
Location: Hertsfordshire
Posts: 2,439
Received 329 Likes on 308 Posts
Default

wow, amazed the wiring was uncut there, most have been butchered at some point btdt with most fords i've had from this time period. Looks better with the stock stuff in.
Old 15-05-2016, 12:19 PM
  #7  
1374lee
PassionFord Post Troll
Thread Starter
iTrader: (11)
 
1374lee's Avatar
 
Join Date: Jan 2006
Location: WALES
Posts: 2,959
Received 91 Likes on 91 Posts
Default

Originally Posted by visa_broke
wow, amazed the wiring was uncut there, most have been butchered at some point btdt with most fords i've had from this time period. Looks better with the stock stuff in.
I have to agree, couldn't beleive it myself.Yes much better with original back in the car and working nicely.

Thanks. Lee.
Old 15-05-2016, 05:13 PM
  #8  
Staffi
20K+ Super Poster.
iTrader: (1)
 
Staffi's Avatar
 
Join Date: Nov 2005
Location: Don't be nosey
Posts: 21,194
Received 107 Likes on 96 Posts
Default

Looking forward to seeing this develope bud
Old 15-05-2016, 07:22 PM
  #9  
1374lee
PassionFord Post Troll
Thread Starter
iTrader: (11)
 
1374lee's Avatar
 
Join Date: Jan 2006
Location: WALES
Posts: 2,959
Received 91 Likes on 91 Posts
Default

Originally Posted by Staffi
Looking forward to seeing this develope bud
Me too Pete.

CheeRS.Lee.
Old 15-05-2016, 08:35 PM
  #10  
james kiely
10K+ Poster!!
iTrader: (5)
 
james kiely's Avatar
 
Join Date: Feb 2008
Location: god knows
Posts: 12,876
Received 424 Likes on 399 Posts
Default

you always do a great job getting your cars up to spec lee,i will be following your progress for sure
Old 16-05-2016, 07:17 AM
  #11  
Glenn_
Glennvestite
iTrader: (1)
 
Glenn_'s Avatar
 
Join Date: Jul 2006
Location: Darlington county durham
Posts: 62,755
Received 1,042 Likes on 996 Posts
Default

Nice to see another saff been looked after.
Old 16-05-2016, 04:43 PM
  #12  
1374lee
PassionFord Post Troll
Thread Starter
iTrader: (11)
 
1374lee's Avatar
 
Join Date: Jan 2006
Location: WALES
Posts: 2,959
Received 91 Likes on 91 Posts
Default

Originally Posted by james kiely
you always do a great job getting your cars up to spec lee,i will be following your progress for sure
Thanks James, I will do my best.

Originally Posted by Glenn_
Nice to see another saff been looked after.
Yes well I like to pamper these old toys..lol.

Thanks. Lee.
Old 22-05-2016, 05:43 PM
  #13  
1374lee
PassionFord Post Troll
Thread Starter
iTrader: (11)
 
1374lee's Avatar
 
Join Date: Jan 2006
Location: WALES
Posts: 2,959
Received 91 Likes on 91 Posts
Default

Collected a few parts over the past week.A few marks on the lights but they are genuine, not sure if I'm gonna used them yet, see if my mate can clean them up.Nice new light blue ovals and original supplying dealer plates and rear screen decal.



My new sapp..making a start on a make over-hbjbafh.jpg






few more to follow.

Last edited by 1374lee; 12-07-2017 at 07:46 PM.
Old 22-05-2016, 06:05 PM
  #14  
1374lee
PassionFord Post Troll
Thread Starter
iTrader: (11)
 
1374lee's Avatar
 
Join Date: Jan 2006
Location: WALES
Posts: 2,959
Received 91 Likes on 91 Posts
Default

New fuel pump cradle bushes kit (no pics of these yet)and a nice eeciv plenum for a later date if I do decide to go for more power.

Name:  eec4%20plenum%201_zpsntjtk9gl.jpg
Views: 1601
Size:  331.2 KB

Name:  eec4%20plenum_zpssuachbxv.jpg
Views: 1632
Size:  326.3 KB

Thanks. Lee.
Old 22-05-2016, 07:21 PM
  #15  
Staffi
20K+ Super Poster.
iTrader: (1)
 
Staffi's Avatar
 
Join Date: Nov 2005
Location: Don't be nosey
Posts: 21,194
Received 107 Likes on 96 Posts
Default

Coming along nicely bud, lights should come up nicely Lee no problem.
Old 22-05-2016, 10:33 PM
  #16  
1374lee
PassionFord Post Troll
Thread Starter
iTrader: (11)
 
1374lee's Avatar
 
Join Date: Jan 2006
Location: WALES
Posts: 2,959
Received 91 Likes on 91 Posts
Default

Originally Posted by Staffi
Coming along nicely bud, lights should come up nicely Lee no problem.
Fingers crossed the lights will be ok Pete.Should make a big difference to the look of the car I hope.

CheeRS. Lee.
Old 29-05-2016, 05:40 PM
  #17  
1374lee
PassionFord Post Troll
Thread Starter
iTrader: (11)
 
1374lee's Avatar
 
Join Date: Jan 2006
Location: WALES
Posts: 2,959
Received 91 Likes on 91 Posts
Default

Got the fuel pump cradle bushes yesterday.



Spent the full day today taking all the wheels off, cleaning them inside and out, cleaned shox, arch guards, calipers and discs up plus a few other bits and bobs,looks much better now in these areas, I'm really pleased with the results. Just a freshen up to remove the dust/grease/grime etc, No concourse job..lol.

Front two arches before a clean.

My new sapp..making a start on a make over-o6n5hh4.jpg



Two front wheels before.








More pics to follow.

Last edited by 1374lee; 12-07-2017 at 07:41 PM.
Old 29-05-2016, 05:43 PM
  #18  
1374lee
PassionFord Post Troll
Thread Starter
iTrader: (11)
 
1374lee's Avatar
 
Join Date: Jan 2006
Location: WALES
Posts: 2,959
Received 91 Likes on 91 Posts
Default

Just a random pic of the car jacked up.

My new sapp..making a start on a make over-c4xinph.jpg

Just a quick snap of under the engine.


Last edited by 1374lee; 12-07-2017 at 07:32 PM.
Old 29-05-2016, 05:45 PM
  #19  
1374lee
PassionFord Post Troll
Thread Starter
iTrader: (11)
 
1374lee's Avatar
 
Join Date: Jan 2006
Location: WALES
Posts: 2,959
Received 91 Likes on 91 Posts
Default

Front wheels after.

My new sapp..making a start on a make over-25h6ucd.jpg

My new sapp..making a start on a make over-ytlwjmn.jpg

My new sapp..making a start on a make over-3fegnca.jpg



Front face

My new sapp..making a start on a make over-rowzdwc.jpg

My new sapp..making a start on a make over-lwcr55l.jpg

My new sapp..making a start on a make over-qxt6vkc.jpg


More pics shortly.

Last edited by 1374lee; 12-07-2017 at 07:27 PM.
Old 29-05-2016, 05:47 PM
  #20  
1374lee
PassionFord Post Troll
Thread Starter
iTrader: (11)
 
1374lee's Avatar
 
Join Date: Jan 2006
Location: WALES
Posts: 2,959
Received 91 Likes on 91 Posts
Default

Front wheels back on the car.

My new sapp..making a start on a make over-ltmuonk.jpg

My new sapp..making a start on a make over-mhixyif.jpg

Last edited by 1374lee; 12-07-2017 at 07:16 PM.
Old 29-05-2016, 05:49 PM
  #21  
1374lee
PassionFord Post Troll
Thread Starter
iTrader: (11)
 
1374lee's Avatar
 
Join Date: Jan 2006
Location: WALES
Posts: 2,959
Received 91 Likes on 91 Posts
Default

Rear wheels before.






Last edited by 1374lee; 12-07-2017 at 07:08 PM.
Old 29-05-2016, 05:52 PM
  #22  
1374lee
PassionFord Post Troll
Thread Starter
iTrader: (11)
 
1374lee's Avatar
 
Join Date: Jan 2006
Location: WALES
Posts: 2,959
Received 91 Likes on 91 Posts
Default

Rear arches after

My new sapp..making a start on a make over-aj0jzdb.jpg

My new sapp..making a start on a make over-vaoldu8.jpg

Rear wheels after.

My new sapp..making a start on a make over-0nbguw6.jpg

My new sapp..making a start on a make over-wvqxvr0.jpg

My new sapp..making a start on a make over-8tookie.jpg

Thanks. Lee.

Last edited by 1374lee; 12-07-2017 at 07:03 PM.
Old 29-05-2016, 05:54 PM
  #23  
1374lee
PassionFord Post Troll
Thread Starter
iTrader: (11)
 
1374lee's Avatar
 
Join Date: Jan 2006
Location: WALES
Posts: 2,959
Received 91 Likes on 91 Posts
Default

Rear wheels back on the car.

My new sapp..making a start on a make over-3z5jfzf.jpg

My new sapp..making a start on a make over-slphdrk.jpg

Random pic of the car in my gagrage.

My new sapp..making a start on a make over-zxvrjdh.jpg

Thanks. Lee.

Last edited by 1374lee; 12-07-2017 at 06:30 PM.
The following users liked this post:
XR4i - Sebastian (12-07-2016)
Old 29-05-2016, 06:05 PM
  #24  
essy
15000
 
essy's Avatar
 
Join Date: Dec 2007
Location: Blackpool
Posts: 43
Received 2 Likes on 2 Posts
Default

Originally Posted by 1374lee
Rear wheels back on the car.





Random pic of the car in my gagrage.



Thanks. Lee.
I am so envious mate.
The following users liked this post:
1374lee (30-05-2016)
Old 29-05-2016, 08:18 PM
  #25  
gcfcos
PassionFord Post Whore!!
 
gcfcos's Avatar
 
Join Date: Dec 2009
Location: South of England
Posts: 6,728
Likes: 0
Received 560 Likes on 522 Posts
Default

Lovely car, real
Nice garage too!
The following users liked this post:
1374lee (30-05-2016)
Old 29-05-2016, 08:39 PM
  #26  
Glenn_
Glennvestite
iTrader: (1)
 
Glenn_'s Avatar
 
Join Date: Jul 2006
Location: Darlington county durham
Posts: 62,755
Received 1,042 Likes on 996 Posts
Default

Looks nice matey. Thats a decent size garage.
The following users liked this post:
1374lee (30-05-2016)
Old 29-05-2016, 09:55 PM
  #27  
hitchwest
Advanced PassionFord User
iTrader: (2)
 
hitchwest's Avatar
 
Join Date: Apr 2007
Posts: 1,792
Received 3 Likes on 3 Posts
Default

Looks a tidy saff , loving the garage
The following users liked this post:
1374lee (30-05-2016)
Old 30-05-2016, 06:32 AM
  #28  
Zetec_mk4_XR3i
PassionFord Post Troll
 
Zetec_mk4_XR3i's Avatar
 
Join Date: Sep 2003
Location: Sunny Dunfermline, Fife
Posts: 2,947
Received 27 Likes on 27 Posts
Default

Great work, I love the lattice wheels, such a cool design 😎
The following users liked this post:
1374lee (30-05-2016)
Old 30-05-2016, 08:50 AM
  #29  
1374lee
PassionFord Post Troll
Thread Starter
iTrader: (11)
 
1374lee's Avatar
 
Join Date: Jan 2006
Location: WALES
Posts: 2,959
Received 91 Likes on 91 Posts
Default

Originally Posted by essy
I am so envious mate.
Thanks for posting up...cheers.

Originally Posted by gcfcos
Lovely car, real
Nice garage too!
Thanks for your comments.

Originally Posted by Glenn_
Looks nice matey. Thats a decent size garage.
Cheers Glenn, yes 2 cars normally live in there.

Originally Posted by hitchwest
Looks a tidy saff , loving the garage
Thanks, yes I had the garage all done out about 8 yrs ago now, try to keep it nice and clean/tidy.My Mrs has her car parked in there aswell.

Originally Posted by Zetec_mk4_XR3i
Great work, I love the lattice wheels, such a cool design 😎
Yes I have to say the lattice wheels are growing on my somehow.
Old 09-06-2016, 07:07 PM
  #30  
1374lee
PassionFord Post Troll
Thread Starter
iTrader: (11)
 
1374lee's Avatar
 
Join Date: Jan 2006
Location: WALES
Posts: 2,959
Received 91 Likes on 91 Posts
Default

Finally had some parts delivered today from Ford, don't look much but set me back Ł375.







Thanks. Lee.

Last edited by 1374lee; 11-07-2017 at 09:05 PM.
Old 09-06-2016, 07:09 PM
  #31  
1374lee
PassionFord Post Troll
Thread Starter
iTrader: (11)
 
1374lee's Avatar
 
Join Date: Jan 2006
Location: WALES
Posts: 2,959
Received 91 Likes on 91 Posts
Default






Had a new Engine and Battery decal kit from Tremona Garage. New fans switch plug and amal valve plug.



A few parts ready for blasting and zinc coating.



Thanks. Lee.

Last edited by 1374lee; 11-07-2017 at 09:02 PM.
Old 09-06-2016, 07:13 PM
  #32  
jason_nike
PassionFord Post Whore!!
 
jason_nike's Avatar
 
Join Date: May 2004
Location: East Sussex
Posts: 3,833
Received 98 Likes on 92 Posts
Default

Cars looking great.
Looked very good from the start, just keeps improving somehow
Old 09-06-2016, 07:32 PM
  #33  
1374lee
PassionFord Post Troll
Thread Starter
iTrader: (11)
 
1374lee's Avatar
 
Join Date: Jan 2006
Location: WALES
Posts: 2,959
Received 91 Likes on 91 Posts
Default

Originally Posted by jason_nike
Cars looking great.
Looked very good from the start, just keeps improving somehow
Thanks Jase, got a long way to go yet, only just beginning, you know me..lol.

CheeRS. Lee.
Old 09-06-2016, 09:04 PM
  #34  
james kiely
10K+ Poster!!
iTrader: (5)
 
james kiely's Avatar
 
Join Date: Feb 2008
Location: god knows
Posts: 12,876
Received 424 Likes on 399 Posts
Default

nice bit of gear their lee


was it hard find the splitter?
Old 09-06-2016, 09:11 PM
  #35  
cossie4i+
TT T38 Power
iTrader: (15)
 
cossie4i+'s Avatar
 
Join Date: Apr 2005
Location: Somerset
Posts: 22,368
Received 32 Likes on 29 Posts
Default

A few ŁŁŁŁŁs spent already then Lee lol


Steve
Old 10-06-2016, 07:04 PM
  #36  
1374lee
PassionFord Post Troll
Thread Starter
iTrader: (11)
 
1374lee's Avatar
 
Join Date: Jan 2006
Location: WALES
Posts: 2,959
Received 91 Likes on 91 Posts
Default

Originally Posted by james kiely
nice bit of gear their lee


was it hard find the splitter?
No James still available from Ford.

Originally Posted by cossie4i+
A few ŁŁŁŁŁs spent already then Lee lol


Steve
Yes indeed Steve, just the beginning isn't it. You know me..lol.

CheeRS. Lee.
Old 10-06-2016, 07:13 PM
  #37  
Staffi
20K+ Super Poster.
iTrader: (1)
 
Staffi's Avatar
 
Join Date: Nov 2005
Location: Don't be nosey
Posts: 21,194
Received 107 Likes on 96 Posts
Default

Cracking Lee, this will be some car, good thing is now Lee, when you come to sell 2WD Sapphs will be 30-40 grand
Old 11-06-2016, 08:19 AM
  #38  
cossie4i+
TT T38 Power
iTrader: (15)
 
cossie4i+'s Avatar
 
Join Date: Apr 2005
Location: Somerset
Posts: 22,368
Received 32 Likes on 29 Posts
Default

Originally Posted by Staffi
Cracking Lee, this will be some car, good thing is now Lee, when you come to sell 2WD Sapphs will be 30-40 grand

Lee never keeps a car that long, just like you lol


Steve
Old 11-06-2016, 08:34 AM
  #39  
Sierrasideways
Too many posts.. I need a life!!
iTrader: (1)
 
Sierrasideways's Avatar
 
Join Date: Sep 2012
Location: Ireland
Posts: 850
Received 49 Likes on 49 Posts
Default

Some good work and spending done so far! Looking forward to some updates. After seeing your Engine and Battery decal kit from Tremona Garage, I must order one for myself. Cheers for that

Philip.
Old 11-06-2016, 09:31 AM
  #40  
1374lee
PassionFord Post Troll
Thread Starter
iTrader: (11)
 
1374lee's Avatar
 
Join Date: Jan 2006
Location: WALES
Posts: 2,959
Received 91 Likes on 91 Posts
Default

Originally Posted by Staffi
Cracking Lee, this will be some car, good thing is now Lee, when you come to sell 2WD Sapphs will be 30-40 grand
Thanks Pete, hopefully the values will continue to increase, fingers crossed.

Originally Posted by cossie4i+
Lee never keeps a car that long, just like you lol


Steve
Well I can't disagree with you there Steve but I am gonna try hard to keep this one..lol.

Originally Posted by Sierrasideways
Some good work and spending done so far! Looking forward to some updates. After seeing your Engine and Battery decal kit from Tremona Garage, I must order one for myself. Cheers for that

Philip.
Thanks Phillip, yes the decals are a nice peice of kit, won't be fitting for a while yet though.

CheeRS. Lee.

Thread Tools
Search this Thread
Quick Reply: My new sapp..making a start on a make over



All times are GMT. The time now is 08:35 AM.