Radiant Red Fiesta RS Turbo progress/build
#321
Boost addict
Thread Starter
great bit of an update
yesterday turned out to be rather productive and we really are not far off from starting the car up now
gearbox was all cleaned out internally and a quick clean on the outside, battery tray was welded in properly as it was loose.
Gearbox was then fitted to engine and engine lifted into the car, we then plumbed all the engine in but fount one of the connectors to heater matrix had perished and crumbled away (better to find now than when out on the road). We also fount passenger side wheel bearing was shot.
jobs left to do are refit drive shafts and new cv boots, plumb in amal valve and dump valve, fit new heater matrix, fill with oil and coolant and get it started for the 1st time
anyway heres a few pics for you all
yesterday turned out to be rather productive and we really are not far off from starting the car up now
gearbox was all cleaned out internally and a quick clean on the outside, battery tray was welded in properly as it was loose.
Gearbox was then fitted to engine and engine lifted into the car, we then plumbed all the engine in but fount one of the connectors to heater matrix had perished and crumbled away (better to find now than when out on the road). We also fount passenger side wheel bearing was shot.
jobs left to do are refit drive shafts and new cv boots, plumb in amal valve and dump valve, fit new heater matrix, fill with oil and coolant and get it started for the 1st time
anyway heres a few pics for you all
#324
Boost addict
Thread Starter
cheers pal we are trying our best thats for sure.
thanks fella. Oh yeah cant wait for the first start up hopefully it goes well haha.
have to agree on the rear/tailpipe just looks so much more at home there.
have to agree on the rear/tailpipe just looks so much more at home there.
The following users liked this post:
Rsmat (04-04-2018)
#329
Boost addict
Thread Starter
another little update got a few more bits that have arrived this week, namely an earth strap as we noticed the one on my gearbox was a bit worse for wear and also a brand new heater matrix.
the more important update is that me and my good mate karl will be working on the car this saturday and hope to have it running for the 1st time im hoping the wife is around so she can get a few vids etc
the more important update is that me and my good mate karl will be working on the car this saturday and hope to have it running for the 1st time im hoping the wife is around so she can get a few vids etc
#330
Advanced PassionFord User
You taking the dash out for the heater matrix, Or dropping the undercover off and sliding up and in?
I gotta do mine at some point, the matrix undercover clips look brittle, I tried one and it snapped.
I gotta do mine at some point, the matrix undercover clips look brittle, I tried one and it snapped.
#332
Advanced PassionFord User
one of the good things about older cars, Several switches, Steering wheel a few bits of trim air vents and the whole thing would come off. I gotta do mine at some point as my matrix snapped under the bonnet doing a hose change.
#333
Boost addict
Thread Starter
so the day finally come 1st start up on the rebuilt engine, sounds a bit tappy but more so on the video than in person, also always going to be a bit more tappy due to solid lifters.
we have got good oil pressure and certainly has cured the massive smoking problem.
we have got good oil pressure and certainly has cured the massive smoking problem.
Last edited by bluntys1rsturbo; 07-04-2018 at 05:54 PM.
#334
Boost addict
Thread Starter
Just wanted to add i cant thank my good mate Karl3dr enough for all the long hours that have been put into this we are so close now to finally having a healthy engine and sorted car.
got a few jobs left to do which are
refit driveshafts and new cv boots
new passenger side wheel bearing
fit new heater matrix
fill the gearbox up with oil
mount and fit the oil pressure and boost gauges
weld bung into downpipe for afr gauge
mount and fit afr gauge
got a few jobs left to do which are
refit driveshafts and new cv boots
new passenger side wheel bearing
fit new heater matrix
fill the gearbox up with oil
mount and fit the oil pressure and boost gauges
weld bung into downpipe for afr gauge
mount and fit afr gauge
#336
Boost addict
Thread Starter
Oh yeah already have a few things planned for when it gets a fresh M.O.T im going have make sure my weekends are more freed up for sure
The following users liked this post:
Rsmat (09-04-2018)
#341
Boost addict
Thread Starter
Alright guys have a little bit more to update on.
we are going to be fitting driveshafts and filling gearbox with oil this thursday evening. Then at the weekend we will be fitting new heater matrix and fitting boost/oil temp gauge into the centre console.
But the main update has to be iv got the mot booked for 9am sat 28th April. I really cant see any reason why it would fail but we will see haha.
we are going to be fitting driveshafts and filling gearbox with oil this thursday evening. Then at the weekend we will be fitting new heater matrix and fitting boost/oil temp gauge into the centre console.
But the main update has to be iv got the mot booked for 9am sat 28th April. I really cant see any reason why it would fail but we will see haha.
#347
Advanced PassionFord User
Those a pillar pods are a good fit. I have one fitted in mine, from before I bought it. It had a chav chrome boost gauge fitted which i removed for a more period TIM gauge instead.
I thought about fitting strut braces aswell, But didnt want to drill away at the car and cut the foam covers in the boot.
I thought about fitting strut braces aswell, But didnt want to drill away at the car and cut the foam covers in the boot.
#348
Boost addict
Thread Starter
Those a pillar pods are a good fit. I have one fitted in mine, from before I bought it. It had a chav chrome boost gauge fitted which i removed for a more period TIM gauge instead.
I thought about fitting strut braces aswell, But didnt want to drill away at the car and cut the foam covers in the boot.
I thought about fitting strut braces aswell, But didnt want to drill away at the car and cut the foam covers in the boot.
yes we will be fitting boost and oil pressure where the centre vents go. Iv bought an already drilled out oe panel to go in there.
i was a bit dubious about drilling but i can soon sort it out if decide to remove them. With regards to the rears i might either remove the foam bits all together or buy another couple and cut them up.
#349
Boost addict
Thread Starter
last night we got the drive shafts fitted with nice new boots on there , gearbox was filled with nice fresh oil, wheels were refitted and the car was finally back on the deck for the 1st time in ages.
we also noticed the fuel hose from the regulator had seen better days and luckily i bought some a while back as fuel was firing out of it, so new hose was fitted and all sorted
i did also go and get 5ltrs of shells finest 99 octane earlier in the day and will be doing the same tomorrow morning, just wanna make sure we have decent fuel in there as the other stuff around 1/4 tank has been sitting for some time.
so the next jobs are now to get this new heater matrix fitted, fit boost and oil pressure gauges into centre console, possibly fit front and rear strut braces and fit a new set of plugs as we think the old ones have got contaminated when stored.
we also noticed the fuel hose from the regulator had seen better days and luckily i bought some a while back as fuel was firing out of it, so new hose was fitted and all sorted
i did also go and get 5ltrs of shells finest 99 octane earlier in the day and will be doing the same tomorrow morning, just wanna make sure we have decent fuel in there as the other stuff around 1/4 tank has been sitting for some time.
so the next jobs are now to get this new heater matrix fitted, fit boost and oil pressure gauges into centre console, possibly fit front and rear strut braces and fit a new set of plugs as we think the old ones have got contaminated when stored.
Last edited by bluntys1rsturbo; 21-04-2018 at 05:22 AM.
#350
Boost addict
Thread Starter
bit more to update on, over the weekend i pulled the car out to give it a clean as its not been done in a good while, whilst out i also popped the rear strut brace in.
on the sunday new plugs were fitted plus boost and oil pressure gauges were fitted into centre console.
sorry i didnt get any pics but will do at some point
so the plan for this weekend is to go for the mot at 9am on saturday then get the car back here to fit new heater matrix and plumb in the aem wideband gauge.
Iv got the car booked in at GT Motorsport in stoke to have it set up properly on 11th May as its certainly in need of a good tune up, once this is done ill be getting some miles on the old girl
on the sunday new plugs were fitted plus boost and oil pressure gauges were fitted into centre console.
sorry i didnt get any pics but will do at some point
so the plan for this weekend is to go for the mot at 9am on saturday then get the car back here to fit new heater matrix and plumb in the aem wideband gauge.
Iv got the car booked in at GT Motorsport in stoke to have it set up properly on 11th May as its certainly in need of a good tune up, once this is done ill be getting some miles on the old girl
#351
Boost addict
Thread Starter
well it was the day of the cars mot and im glad to report it passed with not even one single advisory
the tester was very complementary about the car which is always a nice thing i think
anyway i got a few pics whilst there for you all
really am over the moon with it, now its just to fit heater matrix next weekend andget it set up on 11th may and were good to get a few miles on it
the tester was very complementary about the car which is always a nice thing i think
anyway i got a few pics whilst there for you all
really am over the moon with it, now its just to fit heater matrix next weekend andget it set up on 11th may and were good to get a few miles on it
The following 2 users liked this post by Karl 3dr:
bluntys1rsturbo (29-04-2018),
Rsmat (29-04-2018)
#353
Boost addict
Thread Starter
and me mate and it was great to hear the tester say just what a solid car it was.
as you know absolutely none of this would of been possible without all your hard work/help cant thank you enough
We will be out soon pal got lots planned for us fella
as you know absolutely none of this would of been possible without all your hard work/help cant thank you enough
We will be out soon pal got lots planned for us fella
#356
Advanced PassionFord User
Cant beat the feeling of getting through another mot with no advisories on these old RSs, looking good.
#357
Boost addict
Thread Starter
cheers mate out of interest have you seen this little classic car show thats on in norton green 19th may? iv got my car booked on would be good see a few more classic fords there
#358
Advanced PassionFord User
yeah it is pretty good, especially when a 28 year old car goes through without 1 advisory
cheers mate out of interest have you seen this little classic car show thats on in norton green 19th may? iv got my car booked on would be good see a few more classic fords there
cheers mate out of interest have you seen this little classic car show thats on in norton green 19th may? iv got my car booked on would be good see a few more classic fords there
I lost a bit of interest in the scene lately would have done a few meets and shows by now any other year but got car out last sunday gave it a blast and really enjoyed it, so will have to get my arse into gear.
#359
Boost addict
Thread Starter
I haven't will look into it,can you just turn up on the day?
I lost a bit of interest in the scene lately would have done a few meets and shows by now any other year but got car out last sunday gave it a blast and really enjoyed it, so will have to get my arse into gear.
I lost a bit of interest in the scene lately would have done a few meets and shows by now any other year but got car out last sunday gave it a blast and really enjoyed it, so will have to get my arse into gear.
http://www.leekrotary.co.uk/
i know exactly what you mean about losing interest in the scene as such, these are the only sort of shows im interested in, also be at breakfast at the brewery in stone on 20th may.
#360
Boost addict
Thread Starter
bit more to update on, front seats are removed from the car ready to fit new heater matrix this evening.
the car then as said above off to GT Motorsport to bet set up, cam timing fine tuned etc then i will be happy to start using the car.
Iv got the car booked on at a local car show on 19th May and hopefully will make it to another local show the day after so as long as the cr is ready for then ill be happy
the car then as said above off to GT Motorsport to bet set up, cam timing fine tuned etc then i will be happy to start using the car.
Iv got the car booked on at a local car show on 19th May and hopefully will make it to another local show the day after so as long as the cr is ready for then ill be happy