My first Ford - mk2 fiesta. It's good to be back...
#1
The only way is dagenham
Thread Starter
My first Ford - mk2 fiesta. It's good to be back...
Hi all. I just thought would show you some pic's of my first ford. I am a very happy boy. The car is a 1988 mk2 fiesta 1.1. Is was 2h30 from me so we went and had a look at it. These are the pic from the web site where it was for sale.
So my dad and me had a good look at it and pretty soon realised it was solid and run well. So it was mine for the grand some of 175 euros (150"ish" pounds).
So my dad and me had a good look at it and pretty soon realised it was solid and run well. So it was mine for the grand some of 175 euros (150"ish" pounds).
Last edited by sridgett; 10-02-2020 at 07:11 PM.
#2
The only way is dagenham
Thread Starter
The drive home was not so much fun. As the carb was not set up well and the car keep stalling. We followed my Dad in the van as he had GPS and kept a look out for the rozzers as the car he no control technique ( French M.O.T)
Once we got the car home i washed it so i could see how bad the faded red paint was ( or as my Dad calles it pink)
Its not 2 bad but not 2 good but my Dad is a bodywork specialist so he thinks he can get back to red for me. I have not had a good look at the bad points of the car so will update later on today.
Once we got the car home i washed it so i could see how bad the faded red paint was ( or as my Dad calles it pink)
Its not 2 bad but not 2 good but my Dad is a bodywork specialist so he thinks he can get back to red for me. I have not had a good look at the bad points of the car so will update later on today.
#3
The only way is dagenham
Thread Starter
#5
The only way is dagenham
Thread Starter
The dash is a mess but it will clean up.
There is also some other little jobs but nothing to bad.
Once all that is done I would like to have nice polished red paint black bumpers with peperpot wheels.
I would like to lower it a bit but nothing O.T.T so i was thinking xr2 springs what do you think?
The old 4 speed is showing its age and I am going to put a 5 speed in it. The little 1.1 run well so I am not going to do anything to it for now.
What do you all think?
So if any one has any suggestions or pics please post them to give me ideas.
#7
The only way is dagenham
Thread Starter
Trending Topics
#10
The only way is dagenham
Thread Starter
I thought the same mate that the mk2 ran on unleaded. But when i got the car there was bottles of lead substitute in it. Its got a 1.1in it if that helps?
#13
The only way is dagenham
Thread Starter
I'm thinking of changing the the carb on the fiesta as it a VV and my dad say's thay r dump. so what carb can i put on it??? will any go on the std manifold??? what do i need to do???
#14
The only way is dagenham
Thread Starter
So i've been working hard in the fezz this weekend.
I removed the black strips down the right side of the car. That took a long time as had to go over the stripe with petrol and then scrap it of a bit at a time.
Then I started to bring the old paint back to life, ive t-cut the bonnet and right wing but now getting low on t-cut and as u cant get it in france going to have to get some of amazon.
Ive took the front and back bumpers of ready for a respray. I want to do them black but cant decide on matte or gloss. What are your thought on this?
.
I removed the black strips down the right side of the car. That took a long time as had to go over the stripe with petrol and then scrap it of a bit at a time.
Then I started to bring the old paint back to life, ive t-cut the bonnet and right wing but now getting low on t-cut and as u cant get it in france going to have to get some of amazon.
Ive took the front and back bumpers of ready for a respray. I want to do them black but cant decide on matte or gloss. What are your thought on this?
.
#16
The only way is dagenham
Thread Starter
#18
10K+ Poster!!
Looks like a really good project that, you had it for a bargain price too.
#21
The only way is dagenham
Thread Starter
Just look after it mate. I like periode tuned cars so i will tune the little 1.1 a bit but nothing o.t.t, xr2 springs to get it lower to the ground and xr2 brakes. Hopefully this weekend I will get some peperpot's and get the bumper sprayed but can't decide on matte or gloss black what so you think?
#26
The only way is dagenham
Thread Starter
that's what I was thinking mate gloss and yes i love that look. picking up the wheels and paint this weekend so keep a lot out as i will update also do you know how i cant put a weber on it insted of the old VV?
#27
PassionFord Regular
Not sure on the carb, if it would fit or work assuming xr2 one, but I have seen big carb set ups for these, Valencia, or series x, twin carbs, I've seen a few sets of these but couldn't tell you anything about them.
Jay
Jay
#28
PassionFord Regular
Just asked google, this is what they look like, just an example
http://www.google.co.uk/url?sa=t&rct...oMIqVXOCKvXyZw
Search google 1.1 series x carb, lot of info,
http://www.google.co.uk/url?sa=t&rct...oMIqVXOCKvXyZw
Search google 1.1 series x carb, lot of info,
#29
The only way is dagenham
Thread Starter
Just asked google, this is what they look like, just an example
http://www.google.co.uk/url?sa=t&rct...oMIqVXOCKvXyZw
Search google 1.1 series x carb, lot of info,
http://www.google.co.uk/url?sa=t&rct...oMIqVXOCKvXyZw
Search google 1.1 series x carb, lot of info,
#30
10K+ Poster!!
I'd say gloss black too going from that pic up there.
#32
The only way is dagenham
Thread Starter
Well it's been awhile since i've update the little fezz.
I picked up a cheap set of peperpots. And started work on them. To start with they all looked like this.
After 2 full days sanding,primering and then sanding and primering and then painting it come up like this.
Now just got to do the same with the other 3.
I picked up a cheap set of peperpots. And started work on them. To start with they all looked like this.
After 2 full days sanding,primering and then sanding and primering and then painting it come up like this.
Now just got to do the same with the other 3.
Last edited by sridgett; 24-06-2014 at 06:48 PM.
#34
The only way is dagenham
Thread Starter
#36
Too many posts.. I need a life!!
Great project!
Before I saw the pic of the Fezzie with gloss black bumpers, I thought they would look pony but they look cool!
Looking forward to more updates!!
Before I saw the pic of the Fezzie with gloss black bumpers, I thought they would look pony but they look cool!
Looking forward to more updates!!