James's Frozen White Mk7
 

Hi,

Thought I'd chuck my Mk7 Zetec S on here to see what people think, I know its not a restoration or anything massively out of the ordinary but its my office and I've done my best to make it stand out from the tonnes of Frozen white Mk7's that Ford churn out

When I got it...

Attachment 74249

This is how she stood over last winter...Performance Creations mudflaps, Milltek Cat-back and Eibach 15mm spacers all round...

Attachment 74250

Then I moved onto changing the wheels to Mondeo ST200s and lowered the car 20mm on Eibach springs...

Attachment 74251

More recently I have fitted 300mm brakes and a Steeda short shifter as well as a full Milltek decat system which all make a hell of a difference to the car as a whole!

Attachment 74252

Tomorrow the car will be going for a full service and back to winter mode with the standard 17inch Streetpack wheels being re fitted.

Thanks for looking

C&C welcome

James

Very nice mate.

Cheers pal!

nice fez, underrated if you ask me!

Are they mk3 mondeo calipers on the front.I like the look of the original wheels better than the st200 wheels.

They are indeed mondeo calipers and the original wheels are going back on on Friday...

This happened this morning as my other 2 Streetpacks are in for new tyres...all sealed and taped up

Attachment 74087

Very nice!

Alrighty then...7 hours later and the car is clean, clayed and waxed, glass polished and rain-x'd, interior cleaned, rear drums have another coat of hammerite on them, my streetpacks are back on, my wing mirror caps have been swapped back to white and finally the K&N is out and has been cleaned...I'm knackered!



Bit dirty...



Attachment 73969


Attachment 73970


Clayed and waxed...



Attachment 73971


More hammerite...



Attachment 73972


Streepacks back on with new Rainsports fitted



Attachment 73973


And done...



Attachment 73974


Thanks for looking

Nice, I like the green detailing.

Cheers matey!

On a side note I may be getting rid of the ST200s at some point as I'm fancying a change so if anyone is interested feel free to drop me a message :grin:

So yesterday I decided to tint my fogs using some Laminex I ordered a couple of weeks ago, really easy stuff to work with once you heat it up with a hairdryer so that you can stretch it. The biggest pain in the arse was getting the passenger fog light out due to the washer bottle taking up all of the room behind the light itself!

Out...

Attachment 73380

In...

Attachment 73381

Crap comparison...

Attachment 73382

All done...

Attachment 73383

And I am aware they are illegal...oh well

Nice, who cares about legality! That only counts if your actually use the fogs :blabla:
Just remove the lights altogether for mot then pop em back in.

I've got a friendly MOT'er anyways :king: